White ash cabinetmaking panel

White ash cabinetmaking panel — non-finger-jointed white ash glulam, certified FSC / PEFC. Dimensions: length 5 to 250 cm, width 5 to 120 cm, thicknesses 20 mm / 30 mm / 40 mm. Configured on this page to the nearest mm — shape cut (oval, circle, octagon), rounded corners, edge machining (chamfer, round-over, quarter-round), finish of your choice (raw sanded, oil or varnish). Drilling, laser engraving and CNC cutting on request. Dispatched within 5 to 10 working days. Indoor use only.

Configurer mon produit

Dispatched within 10 days - 2

Paiement :

Paiement en 2x, 3x, 4x avec

Description
Product Details

White ash cabinetmaking panel — made to measure to the nearest mm

The WoodUp white ash cabinetmaking panel is made from non-finger-jointed white ash glulam (cabinetmaking grade), certified FSC / PEFC. It is cut and machined to order according to your exact specifications: 5 to 250 cm in length, 5 to 120 cm in width, to the nearest millimetre. The white ash cabinetmaking panel is a superior-quality non-finger-jointed glulam. Non-finger-jointed means that each board runs the full length of the panel with no intermediate jointing — ensuring perfect grain continuity and a more uniform appearance than a standard glulam. The panel is delivered with the finish chosen in the configurator: raw sanded, oiled or varnished. A protective finish is recommended before use if you choose the raw sanded option.

Configure directly on this page the dimensions, thickness, shape (straight, oval, circle, octagon), edge machining (chamfer, round-over, quarter-round) and rounded corners. For options available on request (drilling, laser engraving, CNC cutting), contact WoodUp customer service before finalising your order.

Main characteristics

Characteristic	Description
Species	Non-finger-jointed white ash glulam (cabinetmaking grade)
Certification	FSC / PEFC — sustainable forest management
Length	5 to 250 cm (to the nearest mm)
Width	5 to 120 cm (to the nearest mm)
Available thicknesses	20 mm / 30 mm / 40 mm
Surface finish	Raw sanded / Oiled / Varnished (choice available in the configurator)
Shape cuts	Oval, circle, octagon — rounded corners
Edge machining	Chamfer / Round-over / Quarter-round
Options on request	Drilling / Laser engraving / CNC cutting
Use	Indoor use only
Production lead time	Dispatched within 5 to 10 working days

Key points

✓ Made to measure to the nearest mm — configured directly on this page to your exact dimensions
✓ Available thicknesses: 20 mm / 30 mm / 40 mm
✓ Machining included: shape (oval, circle, octagon), edges (chamfer, round-over, quarter-round), rounded corners
✓ Finish of your choice: raw sanded, oiled or varnished — ready to fit depending on the option chosen
✓ FSC / PEFC certified — wood from sustainably managed forests
✓ Dispatched within 5 to 10 working days — made to order

Usage and finishing advice

If you have chosen the raw sanded option, apply a protective finish before use. For a surface subject to wear, a polyurethane varnish (2 to 3 coats) offers the best resistance. For a natural matt look, a hard oil penetrates the fibres and nourishes the wood — to be renewed every 1 to 2 years depending on use. Apply the finish to all faces before fitting, including those that will be inaccessible once in place.

Before any installation, store the panel flat in the room where it will be used for 48 to 72 hours to allow it to acclimatise to the ambient humidity.

WoodUp tip

What to know before ordering: the non-finger-jointed construction ensures visual continuity of the grain along the entire length of the panel — suitable for projects with high aesthetic requirements. Maximum length limited to 250 cm. Pre-drilling required. Finish all faces before fitting.

Frequently asked questions

Can this panel be ordered with rounded edges or a special shape?

Yes. Several machining options are available in the configurator: chamfer, round-over and quarter-round for edges, rounded corners, and special oval, circle or octagon shapes. For complex options (drilling, CNC cutting, laser engraving), contact WoodUp customer service before finalising your order.

Can this panel be used outdoors?

No. This panel is intended for indoor use only. For outdoor use or in damp environments, opt for a panel with a suitable treatment or a naturally resistant species.

What finish should I apply to this panel?

The panel is delivered sanded, ready to finish. For a surface subject to wear: polyurethane varnish in 2 to 3 coats. For a natural look: hard oil to be renewed every 1 to 2 years. For a custom colour: wood stain or wood paint. In all cases, finish all faces before fitting.

What is the delivery lead time?

The panel is made to order and dispatched within 5 to 10 working days. You can track progress from your WoodUp customer account.

What is the difference between the white ash cabinetmaking panel and the custom ash panel (ID 549)?

The white ash cabinetmaking panel is non-finger-jointed: each board runs the full length of the panel, ensuring grain continuity and a more refined appearance. The custom ash panel (ID 549) may contain finger-jointed boards in length, which is sufficient for most everyday uses. The cabinetmaking grade is recommended for projects with high aesthetic requirements.

How do I order drilling or laser engraving options?

These options are produced on request — they are not available in the online configurator. Contact WoodUp customer service with your plans and specifications before placing your order.

View all our custom wood panels

How do I order a custom panel?

Species/material: Non-finger-jointed white ash
Quality: A/B
Gluing class: D3: Interior use in contact with run-off or condensation water frequently for a short time and/or subject to high air humidity in the long term. Exterior use protected from the weather.
Use class: Humid environment Class 2 (interior)
Surface finish: grit 100