Round Aluminium Handrail Shiny Stainless Steel + 2 end caps + 2 brackets

Anodised aluminium handrail kit in shiny stainless steel finish.

1 round aluminium handrail diameter 50
2 end caps diameter 50
2 handrail brackets

Sold without screws

ALU HANDRAIL GLOSS STAINLESS STEEL DIAM 50

Bright stainless steel aluminium handrail diam. 50 mm

€50.28

€47.77 Save 5%

In stock Dispatched within 5 days

Length (cm)

x 2

End cap for aluminium handrail diam. 50 mm

€7.44

€7.07 Save 5%

In stock Dispatched within 5 days

Metal colour

x 2

Aluminium bracket for handrail diam. 50 mm

€35.76

€33.97 Save 5%

0 In stock Restocking in progress

Metal colour

€93.48 incl. tax -€4.67 €88.81 incl. tax

Restocking in progress

Quantité

Pack contents

Round anodised aluminium handrail, bright stainless steel finish, diam. 50 mm. Corrosion-resistant thanks to anodising with an oxide layer of 15 microns, suitable for indoor and sheltered outdoor use. Compatible with WoodUp aluminium diam. 50 mm brackets. The bright stainless steel finish gives a contemporary and luminous appearance, compatible with modern staircases. Lengths available to be checked at the time of ordering according to your configuration.

Anodised aluminium bright stainless steel handrail diam. 50 mm

The bright stainless steel aluminium handrail diam. 50 mm is made from anodised aluminium with an oxide layer of 15 microns. This electrolytic surface treatment provides maximum corrosion resistance with no maintenance, suitable for both indoor and sheltered outdoor use.

The bright stainless steel finish gives a contemporary and luminous appearance, compatible with modern staircases and alu balustrades. Compatible with WoodUp aluminium diam. 50 mm brackets.

Main specifications

Specification	Description
Material	Anodised aluminium
Finish	Bright stainless steel
Diameter	50 mm
Anodising treatment	15-micron oxide layer
Use	Indoor and sheltered outdoor
Compatible brackets	Alu brackets diam. 50 mm

Key points

✓ Anodised aluminium: maximum corrosion resistance with no maintenance
✓ Bright stainless steel finish: luminous contemporary appearance
✓ Diam. 50 mm: comfortable grip, compatible with alu balustrades
✓ Indoor and sheltered outdoor: versatile installation
✓ Compatible with diam. 50 mm brackets: WoodUp range

Installation advice

Use compatible diam. 50 mm brackets. Space them 80 to 100 cm maximum apart, with a bracket within 30 cm of each end. Check the level before final tightening. For outdoor use, choose stainless steel or anodised alu brackets to avoid corrosion marks.

Maintenance and protection

Anodised aluminium requires no special maintenance. An annual clean with clear water and mild soap is sufficient. Avoid abrasive or acidic products that could scratch the anodised surface. The finish (bright stainless steel, gloss black, white) is durable and UV-resistant under normal indoor use.

Frequently asked questions

Are the brackets supplied with the bright stainless steel alu handrail?

No, the wall brackets are not supplied. Choose brackets suited to the diameter and your wall type (concrete, brick, plaster). See our compatible diam. 50 mm accessories.

How do I fix the bright stainless steel alu handrail to the wall?

Position the brackets at regular intervals (80–100 cm max) checking the level. Drill and plug according to the wall material. Fix the brackets then slide the handrail into place and tighten. The handrail is not pre-drilled: drill at the chosen locations according to the actual position of your brackets.

Is the bright stainless steel alu handrail compatible with WoodUp staircases?

Yes, this handrail is compatible with WoodUp staircases and any other installation requiring continuous support. It also fits corridors, landings and existing ramps. Check the available length (200, 250 or 300 cm) against your configuration.

What is the difference between a bright stainless steel handrail and a wooden handrail?

The bright stainless steel metal handrail is maintenance-free, moisture-resistant and has a clean contemporary appearance. The wooden handrail (beech, oak, fir) brings a natural and warm touch but requires a finish and regular maintenance. Metal is recommended for areas exposed to moisture or modern environments.

Can the bright stainless steel alu handrail be cut to the desired length?

Yes, the handrail can be cut to length with a hacksaw or a circular saw fitted with a metal blade. Carefully deburr the ends after cutting and replace or adapt the end caps as necessary.

View the full aluminium handrail range

Data sheet

Species/material: Alu
Section (mm): 1.5
Range: Round 50 mm
Handrail Type: Round
Colour: Grey
Usage: Exterior
Usage: Interior
Usage: Interior and Exterior
Round handrail diameter: 50

End cap for aluminium handrail diam. 50 mm. Available in bright stainless steel or black to match the handrail finish. Provides a clean, neat finish to the ends and protects the inside of the tube against dust and moisture. Compatible with WoodUp range round aluminium handrails diam. 50 mm. Fitted by simple snap-fit into the tube, with no tools or fixings. Allow 2 end caps per handrail (one per end).

End cap for aluminium handrail diam. 50 mm

The end cap for aluminium handrail diam. 50 mm is designed to neatly close the ends of the tube. It is fitted by simple snap-fit, with no tools or fixings required. Available in polished stainless steel or black to match the handrail finish.

Main features

Characteristic	Description
Material	Aluminium
Finish	Polished stainless steel or Black
Compatible diameter	50 mm
Installation	Snap-fit — no tools required
Usage	Indoor and outdoor

Key points

? 2 colours: polished stainless steel or black to match the handrail
? Diam. 50 mm: compatible with WoodUp 50 mm aluminium handrails
? Snap-fit installation: no tools or fixings required
? Neat finish: protects the inside of the tube
? Lightweight and discreet: does not alter the aesthetics of the handrail

Installation advice

Carefully deburr the end of the tube after cutting before fitting the end cap. Insert the end cap into the tube and press until it reaches the stop. If the end cap does not hold, a drop of superglue can be applied inside the tube.

Maintenance and protection

Anodised aluminium requires no special maintenance. An annual clean with clean water and mild soap is sufficient. Avoid abrasive or acidic products that could scratch the anodised surface. The finish (polished stainless steel, gloss black, white) is durable and UV-resistant under normal indoor use.

Frequently asked questions

Is the end cap compatible with round wood handrails diam. 42 mm?

No, this end cap is specific to aluminium handrails diam. 50 mm. For round wood handrails diam. 42 mm, see the WoodUp range aluminium end pieces diam. 42 mm.

Does the end cap need to be glued?

No, the end cap is fitted by simple snap-fit. If the cap tends to come loose (after a slightly uneven cut), a drop of cyanoacrylate superglue can be applied to fix it permanently.

Can this end cap be used outdoors?

Yes, the aluminium and finishes (polished stainless steel, black) are corrosion-resistant and suitable for outdoor use. Choose the finish that matches your handrail.

How many end caps are needed per handrail?

2 end caps are needed per handrail: one at each end of the tube. If the handrail has been cut and meets a connector or a wall-start bracket, only the open end requires an end cap.

Is the end cap sold individually or in a pair?

Check the packaging when ordering — it may be sold individually or as a set. For a standard handrail (2 open ends), order 2 end caps.

What is the difference between an end cap and an aluminium end piece for a handrail?

The end cap (ID 767) is a simple cap that fits into the open end of the 50 mm diam. aluminium tube — tool-free fitting, discreet finish. The aluminium end piece (with adapter) is a more elaborate finishing piece, designed for round wood handrails of diam. 42 mm with an adapter — it covers the end of the wood and provides the transition between the wood and the bracket. Choose the end cap for aluminium handrails and the end piece for wooden handrails.

View all our handrail accessories

Data sheet

Species/material: Aluminium
Range: Round 50 mm
Handrail Type: Round
Usage: Interior and Exterior

Aluminium bracket with polished stainless steel finish for handrail diam. 50 mm. Designed for round aluminium handrails of diam. 50 mm in the WoodUp range. Polished stainless steel finish compatible with polished stainless steel or gloss black aluminium handrails. Wall fixing screws not included — to be selected according to the wall material. Indoor and outdoor use depending on configuration. Space brackets 80 to 100 cm maximum apart with a bracket within 30 cm of each end of the handrail.

Polished stainless steel aluminium bracket for handrail diam. 50 mm

The aluminium bracket with polished stainless steel finish is designed to fix round handrails of diam. 50 mm to a wall. It is compatible with the anodised aluminium handrails in the WoodUp range (polished stainless steel and gloss black). Wall fixing screws not included — to be selected according to the wall material.

Main features

Characteristic	Description
Material	Aluminium
Finish	Polished stainless steel
Compatible diameter	50 mm
Fixings	Not included — to be selected according to the wall material
Usage	Indoor and outdoor depending on configuration

Key points

? Diam. 50 mm: specific to WoodUp 50 mm aluminium handrails
? Polished stainless steel finish: matches the aluminium handrails in the range
? Fixings not included: to be selected according to the wall material and handrail
? Aluminium: lightweight and durable
? Sleek design: discreet on the wall

Installation advice

Space the brackets 80 to 100 cm maximum apart with a bracket within 30 cm of each end. Choose the appropriate wall plugs for the wall material. Check the level before final tightening.

Maintenance and protection

Frequently asked questions

Which handrails is this bracket compatible with?

This bracket is compatible with handrails of 50 mm diameter.

Does this bracket come with wall fixing screws?

No, wall fixing screws are not included. They must be selected according to the wall material (concrete, brick, plaster) and the handrail material (wood, metal, aluminium) to ensure a suitable hold.

What is the recommended spacing between brackets?

The recommended spacing is 80 to 100 cm maximum between each bracket for optimum hold. At the start and end of the handrail, place a bracket within 30 cm of each end.

Is this bracket suitable for outdoor use?

Check the bracket material before outdoor installation. Stainless steel brackets are suitable for outdoor use. Galvanised metal brackets are suitable for sheltered outdoor use. Painted brackets are for indoor use only.

What is the difference between a fixed bracket and an adjustable bracket?

A fixed bracket is screwed directly into the wall at a preset angle — simpler to fit. An adjustable bracket allows the angle to be adjusted (generally by 2 cm) to compensate for a slight irregularity in the wall or staircase, making installation easier in non-standard configurations.

View all our handrail accessories