Wooden canopy porch for garage - Fir kit BANTARDE 300 cm

Name: Wooden canopy porch for garage - Fir kit BANTARDE 300 cm
Brand: Levigne
SKU: OS300
Price: 349 EUR
Availability: InStock

Fir-wood door canopy kit for a garage door, fixed width of 300 cm, suitable for a garage door up to 250 cm wide. Choice of depths: 80, 100 or 120 cm, depending on the straight bracket selected (45x45, 60x60 or 80x80 cm). Includes two 145x45 mm purlins, 3 m long, rafters and assembly screws. Untreated wood must be treated before installation. Roof tiles, slates and wall-fixing plugs not included. Made in France.

Length (cm)

Depth (cm)

Opening (cm)

Reference OS300

€349.00 incl. tax

In stock Dispatched within 10 days

Quantité

Paiement :

Paiement en 2x, 3x, 4x avec

Wooden canopy porch for garage door - Fir kit BANTARDE

The BANTARDE canopy is an untreated fir-wood kit designed specifically to cover a 300 cm wide garage door. Its straight brackets give it a simple, functional profile suited to contemporary façades and attached garages.

Three depths are available: 80, 100 or 120 cm, depending on exposure and the level of protection required. The kit includes 2 straight brackets, 2 purlins, the rafters and the assembly screws. Tiles and wall fixing plugs must be sourced separately.

Key features

Feature	Description
Material	Raw solid fir, untreated
Width	300 cm (fixed dimension)
Depth	80 cm / 100 cm / 120 cm
Brackets	2 straight brackets included
Brackets by depth	80 cm: 45x45 cm brackets – 100 cm: 60x60 cm brackets – 120 cm: 80x80 cm brackets
Purlins	2 purlins 145x45 mm cross-section, 3 m length
Screws and fixings	Included for kit assembly
Not included	Covering (tiles, slates), wall fixing plugs
Delivery	Kit supplied unassembled, raw timber
Origin	French manufacture

Key features

✓ Designed for garages: 300 cm width suited to standard garage doors
✓ Straight brackets: clean profile, suited to contemporary facades
✓ 3 depths: 80, 100 or 120 cm depending on exposure
✓ Compatible with tiles and slates
✓ French manufacture

Installation advice

The straight brackets are fixed directly onto the facade, above the garage door. Identify the concrete lintel or the area of solid masonry — this is the strongest fixing point. Use heavy expansion plugs (12 to 14 mm) suited to the weight of the chosen covering. Always pre-drill the timber before screwing.

Fit the two purlins horizontally onto the brackets, then fit the rafters perpendicular to them. Before buying, check that your roof tiles are compatible with the bracket slope. Apply a neutral-cure silicone seal between the upper purlin and the wall to prevent water ingress. Estimated assembly time: 3 to 5 hours for two people.

Maintenance and protection

Apply at least two coats of breathable wood stain or an exterior wood saturator before installation. Reapply every 2 to 3 years to accessible surfaces. Treating the undersides of the rafters is particularly important.

Frequently asked questions

What is the difference between the BANTARDE and the UGLAS for a garage door?

Both models are 300 cm wide and offer the same choice of depths. The difference lies in the brackets: the BANTARDE has straight brackets for a functional, contemporary profile, while the UGLAS has curved brackets for a more traditional look. Choose the one that suits your façade.

Is this canopy suitable for a garage door 250 cm wide?

Yes. The 300 cm width leaves a 25 cm overhang on each side of a 250 cm door, which is sufficient for adequate protection. For a door of 300 cm or more, the canopy is fitted without a lateral overhang — in this case, please consult our made-to-measure model.

Should the fir be treated before installation?

Yes, without exception. Fir is not moisture-resistant without treatment. Apply wood stain or saturator to all faces before assembly. Reapply every 2 to 3 years. The tile covering protects the upper faces — treat the lower faces and brackets as a priority.

Is the BANTARDE suitable for a wide-span canopy?

Yes. At 300 cm wide, the BANTARDE covers garage doors up to 250 cm wide. It is the recommended solution when a long canopy is needed without ordering a bespoke model. For widths over 300 cm, see our bespoke canopy, which has no specified maximum length.

Are the fixing plugs included?

No. The kit assembly screws are included, but wall fixing plugs must be sourced separately. For a reinforced concrete lintel (common above a garage door), 12 mm expansion plugs are generally suitable. For hollow brickwork, chemical anchors are recommended.

View the full canopy and porch range

UGLAS canopy — curved brackets, same width

Exterior wood stains and protective coatings