Your cart
There are no more items in your cart
Wooden gate kit 100x120 cm - Screws included
Untreated Douglas fir or pine gate kit, 120 cm high, 100 cm wide, 90x20 mm slats, screws included. Supplied as a one-package kit (1200x200x90 mm), with slats and rails to assemble. Fixing hardware (hinges, lock) not supplied – choose to suit the mounting surface. Douglas fir does not require treatment; protect pine before installation. For outdoor use. Douglas fir does not require treatment, but annual oiling preserves its colour.
Douglas Fir or Pine Gate Kit 100x120 cm – 90x20 mm Slats, Screws Included
This gate comes as a kit to assemble, in untreated Douglas fir or pine. It measures 100x120 cm (width x height), with a slat cross-section of 90x20 mm. The kit includes the slats, cross rails and diagonal brace, with screws included. Fixing hardware (hinges, latch and handle) must be purchased separately to suit the installation surface. Douglas fir does not require treatment; pine must be treated before outdoor installation.
Key features
| Feature | Description |
|---|---|
| Wood species | Untreated Douglas fir or pine |
| Dimensions | 100x120 cm (W x H) |
| Slat cross-section | 90x20 mm |
| Packaging | 1 parcel: 1200x200x90 mm |
| Screws | Included |
| Fixing hardware | Not supplied – hinges and latch required |
| Douglas fir treatment | Not required – annual oiling recommended |
| Pine treatment | Water-repellent treatment required before installation |
| Use | Outdoor – garden, fence, private access |
Key points
- ✓ Complete kit: slats, cross rails, diagonal brace and screws supplied
- ✓ Douglas fir or pine: choose according to your budget and desired durability
- ✓ 100x120 cm: standard dimensions for a garden or vegetable plot gate
- ✓ 90x20 mm cross-section: good rigidity for a gate used daily
- ✓ Customisable: unfinished wood to paint, stain or leave natural
Installation tips
Assemble the slats onto the cross rails, starting with the ones at the top and bottom ends. Then fit the diagonal brace from the bottom corner on the hinge side to the top corner on the latch side – this orientation prevents the gate from warping under its own weight. Pre-drill before screwing to prevent splitting. Apply the treatment before fitting the hardware to protect the areas beneath the fittings. Choose hinges that can support the weight of the finished gate leaf – approximately 12 to 15 kg.
Care and protection
Douglas fir: greys naturally without losing strength; apply exterior wood oil annually to maintain its colour. Pine: renew the wood stain or saturating oil every 2 years. Each spring, check that the cross-rail screws are tight and the gate is aligned to prevent warping.
WoodUp tip
Before you buy: the gate comes in one parcel with its screws, but hinges and a latch must be purchased separately according to the desired opening direction. Untreated Douglas fir can be installed as it is and oiled once a year; pine needs a water-repellent treatment before installation, not afterwards, as some parts of the frame become difficult to access once assembled. Check that the frame is square before permanently fixing the hinges to prevent the gate from rubbing or failing to close properly.
Frequently asked questions
Do I need posts to install this gate?
Yes. The gate attaches to two load-bearing posts (not supplied), securely anchored in the ground or to an existing wall. For installation on wooden posts, choose a minimum cross-section of 9x9 cm, anchored to a depth of 60 cm.
What hardware do I need for this gate?
You will need 2 adjustable hinges (minimum 80 kg capacity), 1 latch or keyed lock, depending on how the gate will be used, and a pull handle. Choose stainless-steel or galvanised-steel hardware for outdoor use.
Can this gate open in both directions?
No, unless you use double-action hinges. With standard hinges, the gate opens in only one direction. Decide which way you want it to open when installing it.
Are the supplied screws stainless steel?
The supplied screws are stainless steel, ensuring the outdoor assembly lasts without the risk of corrosion.
Can this gate be motorised?
A 100 cm gate can technically be motorised with a suitable electric actuator. The gate leaf’s weight (12–15 kg) is within the range of most standard gate motors. Consult a specialist installer.
- Species/material
- Douglas fir
Pine - Length (cm)
- 100
- Section (mm)
- 90 × 20 mm
- Height
- 120
- Usage
- Exterior
R6K100
20 Products
3420610010119
No questions yet.
Your question has been successfully sent to our team. Thank you for the question!
Ask a question
hide the form
Dispatch within 10 days
Dispatch within 10 days when the product is in stock *.
* Except bespoke products
Dispatched within 6-8 weeks
Dispatched within 6-8 weeks for personalised and made-to-measure products.
Secure payment
Payment in 1 or 3 instalments at no extra cost. Bank transfer, cheque or PayPal
Satisfied or refunded
Satisfied or refunded if returned within 14 calendar days (Sundays and public holidays included) following delivery.
8 other products in the same category:
- -€10.00
No questions yet.
Your question has been successfully sent to our team. Thank you for the question!
Ask a question
hide the form
Tap to zoom
