ROCLES handrail outer side start beech spindles
ROCLES handrail outer side start beech spindles for ROCLES DQT WoodUp staircase. wood spindles 65 x 20 mm, newel posts 70 x 70 mm, handrail 50 x 50 mm, bottom rail 50 x 35 mm, fixings included. Beech LC delivered raw and untreated, to be varnished (2 coats recommended for the handrail subject to contact) or painted before use. Non-reversible: you must verify the quarter-turn configuration before ordering. Indoor use only.
ROCLES handrail outer side start beech spindles
The ROCLES handrail outer side start beech spindles is a wooden spindle handrail 65 x 20 mm for the ROCLES DQT staircase. It includes wood spindles 65 x 20 mm, newel posts 70 x 70 mm, a handrail 50 x 50 mm and a bottom rail 50 x 35 mm. Fixings included. Available in Beech LC. Non-reversible: you must verify the quarter-turn position and direction of travel before ordering.
Indoor use only - LC wood species are not suitable for outdoor use. Can be installed after the staircase has been fitted.
Main characteristics
| Characteristic | Description |
|---|---|
| Compatible staircase | ROCLES DQT (ID 529) |
| Position | Outer side |
| Wood spindles | 65 x 20 mm |
| Newel posts | 70 x 70 mm |
| Handrail | 50 x 50 mm |
| Bottom rail | 50 x 35 mm |
| Available wood species | Beech LC |
| Fixings | Included |
| Reversibility | Non-reversible |
| Use | Indoor use only |
Key points
- ✓ Wood spindles 65x20 mm: warm traditional aesthetic
- ✓ Outer side: outer side of the curve
- ✓ Available wood species: Beech LC
- ✓ Fixings included: complete installation kit
- ✓ Non-reversible: choose according to the quarter-turn configuration
Installation advice
Can be installed after the staircase has been fitted. Fix newel posts, bottom rail, spindles then handrail in that order. Check the height of 90 cm minimum from the nosing and spacing less than 11 cm (standard NF P01-012). Apply varnish or paint before final fixing. Two people recommended.
Maintenance and protection
The wood is delivered raw and untreated. Apply a protective finish before use: 2-coat satin varnish (maximum resistance), oil-wax (natural look, renewed every 1-2 years) or paint. The handrail, subject to frequent contact, benefits from an abrasion-resistant varnish.
Annual maintenance with a product suited to the chosen finish. Avoid abrasive or solvent-based products.
Frequently asked questions
What is the outer side of a staircase?
On a quarter-turn staircase, a distinction is made between the inner side (the side towards which the staircase turns, inside of the curve) and the outer side (the side opposite the curve, the open side of the flight). This handrail is positioned on the outer side. To determine it, go up your staircase and observe which side the quarter turn is on.
Why is this handrail non-reversible?
The geometry of the quarter turn imposes a specific shape on the handrail. An outer side handrail cannot be reversed to become an inner side one - the angles and lengths of each section differ. You must verify your configuration before ordering: quarter-turn position and direction of travel.
Can this handrail be installed after fitting the ROCLES staircase?
This handrail must be installed simultaneously with the staircase - some fixings are only accessible during assembly. Plan the installation at the same time.
What finish should be applied to this wooden handrail?
The handrail, subject to daily contact, requires an abrasion-resistant finish: 2-coat satin varnish is recommended. For the spindles and newel posts, an oil-wax (natural look) or paint depending on the décor. Apply the finish before final fixing to treat hidden areas.
Does the spacing between spindles comply with the safety standard?
The spacing must be less than 11 cm to prevent the passage of an 11 cm sphere (standard NF P01-012). Check the actual spacing after installation according to your staircase configuration, particularly at the bottom of the flight where the handrail is more open.
No questions yet.
You might also like
Dispatch within 10 days when the product is in stock *.
* Except bespoke products
Dispatched within 6-8 weeks for personalised and made-to-measure products.
Payment in 1 or 3 instalments at no extra cost. Bank transfer, cheque or PayPal
Satisfied or refunded if returned within 14 calendar days (Sundays and public holidays included) following delivery.
8 other products in the same category:
No questions yet.





