ROCLES/GOULES INTERIOR HANDRAIL WITH WOODEN BALUSTER

ROCLES GOULES Indoor Wood Spindle Handrail – Double Quarter Turn

Indoor wood spindle handrail for ROCLES or GOULES double quarter turn staircase. Available in oak, beech or glued laminated fir depending on budget and desired aesthetics. Designed for simultaneous installation with ROCLES and GOULES double quarter turn WoodUp staircases, compatible with left or right configuration depending on the staircase orientation. Raw untreated wood, to be varnished or painted before use, indoor use only.

Wood species

Glued laminated oak
Glued laminated beech
Fir

Quarter turn

Double quarter-turn left
Double quarter-turn right

Reference RAFBINTDQTCHD

€700.09 incl. tax

Including €1.19 for ecotax

Made to order

Quantité

Paiement :

Paiement en 2x, 3x, 4x avec

ROCLES/GOULES interior wooden spindle handrail for ROCLES or GOULES staircase

The ROCLES/GOULES handrail is an interior handrail with wooden spindles designed for ROCLES or GOULES staircases. Available in oak, beech or fir glulam, it brings a traditional and warm touch to your interior staircase whilst providing protection in compliance with safety standards.

Compatible with the double quarter-turn configuration of the ROCLES or GOULES WoodUp staircase (left or right depending on configuration). Supplied raw untreated, to be finished before use.

Main features

Feature	Description
Available wood species	oak, beech or fir glulam
Design	Traditional vertical spindles
Configuration	Double quarter-turn
Compatibility	ROCLES or GOULES WoodUp staircase
Finish	Raw wood - to be varnished, painted or oiled
Use	Interior

Key points

✓ 3 species available: oak, beech or fir glulam depending on budget and aesthetics
✓ Traditional spindle design: classic aesthetic suited to all interiors
✓ ROCLES or GOULES compatible: designed and sized for this staircase
✓ Double quarter-turn configuration: left or right depending on your installation
✓ Raw wood: customisable with paint, varnish or wood stain

Installation advice

Install this handrail simultaneously with the ROCLES or GOULES staircase for a consistent result. First fix the start and end newel posts, then the bottom rail, the spindles and finally the handrail. Check the final height of 90 cm (vertical measurement from the nosing).

Apply the finish to all elements before final fixing. The handrail requires an abrasion-resistant finish (2 coats of varnish recommended). The spacing between the spindles must be less than 11 cm (standard NF P01-012).

Maintenance and protection

The wood is supplied raw untreated. Apply a protective finish before heavy use - satin varnish (2 coats), oil-wax or polyurethane varnish depending on the desired appearance. The handrail, subject to frequent contact, particularly benefits from an abrasion-resistant varnish.

Annual maintenance with a product suited to the chosen finish is sufficient to preserve the appearance of the wood. Avoid abrasive products or solvent-based cleaners that degrade finishes.

Frequently asked questions

Which wood species should I choose between fir, beech and oak for this handrail?

Fir is the economical option, softer but sufficient for an interior handrail with a protective finish. Beech is the traditional species for handrails: harder, abrasion-resistant, fine and regular grain. Oak is the premium choice: maximum lifespan, noble appearance, but higher price. For standard family use, beech offers the best quality/durability/price ratio.

Is this handrail compatible with staircases other than the ROCLES or GOULES?

The handrail is sized for the ROCLES or GOULES WoodUp staircase. Adaptation to other staircases of similar configuration (double quarter-turn) is possible by checking dimensional compatibility. Contact WoodUp with the precise measurements of your stairwell and staircase before ordering.

Can a different wood species be chosen from that of the staircase?

Yes, there is no obligation to match the wood species between the staircase and the handrail. Some homeowners choose oak for the handrail on a fir staircase for greater durability on the handrail, or for a contrasting aesthetic effect. Apply the same colour finish for visual harmony.

Is the handrail supplied assembled or as a kit?

The handrail is supplied as a kit to be assembled according to WoodUp instructions. Assembly requires a drill, wood drill bits, a level and a mallet or hammer. Installation is accessible to a DIYer with basic experience. Allow 2 to 4 hours for installation depending on the configuration.

What safety standard applies to an interior staircase handrail?

In France, standard NF P01-012 applies to balustrades. For a private interior staircase, the minimum height is 90 cm from the nosing. The spacing between spindles must prevent the passage of an 11 cm sphere. These requirements are the minimum regulatory standards for new builds.

See all our wooden spindle handrails