FURKA + INTERIOR HANDRAIL WOOD SPINDLE

FURKA INTERIOR HANDRAIL WOOD SPINDLE

Pack description

FURKA INTERIOR HANDRAIL WOOD SPINDLE

Pack contents

FURKA high quarter turn staircase
FURKA Interior Wooden Spindle Handrail – Quarter Turn Top

Top quarter-turn staircase FURKA, Comfort range — height 288 cm. Available in beech, oak or glued laminated fir. 15 steps + landing nosing, width 80 cm, step rise 18 cm, going 22 cm, footprint 346 cm, stairwell opening 346x82 cm. Going 22 cm and rise 18 cm for optimal comfort. Fixings and instructions included. Finishing required before installation — pre-drilling on beech and oak. Interior use only. Check the direction (right or left) before ordering.

Top Quarter-Turn Staircase FURKA - Comfort Range, 288 cm, Rise 18 cm, Going 22 cm

The FURKA staircase is a top quarter-turn staircase from the Comfort range, available in beech, oak or glued laminated fir. It shares the same dimensional characteristics as the SELA (rise 18 cm / going 22 cm / floor-to-floor height 288 cm), with a top quarter-turn configuration and a footprint of 346 cm. The FURKA has 15 steps + 1 landing nosing (15 and a half risers) for a stairwell opening of 346x82 cm.

The Blondel formula is respected: 2x18 + 22 = 58, within the recommended range for optimal climbing comfort. The FURKA is sold without a handrail - the handrail is available as an option and can be installed after assembly. The direction (right or left) must be specified at time of order. The wood is delivered raw; finishing is required before use.

Main specifications

Specification	Description
Type	Top quarter-turn, interior, kit
Range	Comfort (rise 18 cm / going 22 cm - Blondel formula)
Available species	Glued laminated beech / Glued laminated oak / Fir
Floor-to-floor height	288 cm (trimmable)
Number of steps	15 steps + 1 landing nosing
Step rise	18 cm
Going	22 cm
Width	80 cm
Tread section	210x30 mm
Footprint	346 cm
Recommended stairwell opening	346x82 cm
Risers	With or without, your choice
Direction	Right or left - non-reversible, must be specified at time of order
Handrail	Optional - non-reversible, direction to be specified at time of order
Finish	Raw wood - finishing required before use
Use	Interior use only

Key points

✓ Comfort range: rise 18 cm / going 22 cm - Blondel formula for optimal everyday use
✓ 15 steps + landing nosing: neat flush finish at upper floor level
✓ Footprint 346 cm: larger than Standard quarter-turns - check available space
✓ Three species: fir, beech or glued laminated oak
✓ Handrail can be added after assembly: fixings supplied
✓ Direction final: right or left - must be determined before ordering

Installation tips

Check the footprint (346 cm) and the stairwell opening (346x82 cm) before ordering. Determine the direction (right or left) - final. The handrail can be added after the staircase has been assembled - reversible right or left. Pre-drill on beech and oak. Minimum two people. Apply the finish after complete installation.

Maintenance and protection

Apply a suitable finish before first use. Varnish in 2-3 coats on beech and oak, oil-wax on fir. As the Comfort range is preferred for main staircases, a quality finish (varnish) is recommended even on fir. Renew every 5-7 years. Cleaning: damp cloth, neutral pH.

WoodUp tip

The FURKA and the SELA are both top quarter-turn Comfort staircases in the WoodUp range - same general dimensions (rise 18 cm / going 22 cm / floor-to-floor height 288 cm), very similar footprint (FURKA 346 cm / SELA 351 cm). The difference is 5 cm in footprint - negligible in practice. Both models are suited to the same type of configuration. If your space is strictly limited to 346 cm, the FURKA is the preferred choice.

Important before purchasing: the stairwell opening of 346x82 cm is long - ensure that the floor structure allows an opening of this length to be made without compromising structural integrity (load-bearing elements, joists, beams). If in doubt, consult a professional before ordering.

Frequently asked questions

What is the difference between the FURKA and the SELA in the Comfort range?

The FURKA (footprint 346 cm / stairwell opening 346x82 cm / 15 steps + landing nosing) and the SELA (footprint 351 cm / stairwell opening 82x351 cm / 15 steps) are both top quarter-turn Comfort staircases with a rise of 18 cm and going of 22 cm. The difference is 5 cm in footprint. Both can have a landing nosing depending on the version - check at time of order. Choose according to the exact dimensions of your stairwell opening.

Can the FURKA be trimmed for a height of 270 cm?

Yes. For 270 cm, removing one step (15 steps x 18 cm = 270 cm exactly) achieves the desired height without modifying the step rise. Or trim the stringers slightly according to the diagram in the instructions to keep the 15 steps with an adjusted rise. Check on finished floor and ceiling before any work.

Why does the Comfort range have a landing nosing whereas the Standard range does not always?

The landing nosing is linked to the calculation of the number of steps and the step rise. With a rise of 18 cm for 288 cm: 288/18 = 16 risers, i.e. 15 treads + 1 landing riser = landing nosing required to reach exactly the upper floor level. The Standard range (rise 20 cm for 280 cm: 280/20 = 14) does not always have this half-element.

Is the FURKA suitable for a main staircase used by elderly people?

Yes - it is an optimal configuration. The going of 22 cm allows the foot to be placed fully on each step without overhanging, and the step rise of 18 cm reduces the effort when climbing. Pair it with a sturdy handrail for maximum safety. The FURKA Comfort is among the most suitable kit staircases for multigenerational use.

Which species to choose for the FURKA in a contemporary home?

In a contemporary interior, oak with a matt oiled finish enhances the natural grain and complements raw materials (concrete, metal). Beech with a satin varnish offers a clean, bright surface suited to minimalist interiors. Fir painted white is also an economical option for Scandinavian-style interiors. A matching handrail in oak or beech reinforces the aesthetic consistency.

Can the FURKA be paired with a metal handrail?

Yes. The metal rail or metal cable handrails available from WoodUp are compatible with the Comfort range staircases. The end newel posts can be in matching wood or metal depending on the desired aesthetic. Refer to the accessories section or contact customer service for models compatible with a top quarter-turn staircase 80 cm wide.

Our complementary staircases

SELA - Top quarter-turn, Comfort range, footprint 351 cm

GAVIA - Straight staircase, Comfort range, footprint 336 cm

ALBULA - Double quarter-turn, Comfort range, stairwell opening 164x175 cm

Data sheet

Width (cm): 80
Species/material: Fir
Species/material: Glued laminated oak
Species/material: Glued laminated beech
Number of treads: 15+1/2
Section (mm): 230*30
Footprint (cm): 346
Recommended stairwell opening (cm): 346 x 82
Floor-to-floor height (cm): 288
Step height (cm): 18
Range: Comfort
Tread depth (cm): 22
Staircase type: Top quarter turn

FURKA interior wooden spindle handrail for quarter turn top staircase. Available in oak, beech or glued laminated pine depending on budget and aesthetics. Designed for FURKA quarter turn top WoodUp staircases, compatible with left or right configuration depending on the staircase orientation. Raw untreated wood, to be varnished (2 coats for the handrail subject to frequent contact) or painted before use, interior use only.

FURKA indoor wooden spindle handrail for FURKA staircase

The FURKA handrail is an indoor wooden spindle handrail designed for FURKA staircases. Available in oak, beech or laminated fir, it adds a traditional and warm touch to your indoor staircase while ensuring protection that complies with safety standards.

Compatible with the upper quarter turn configuration of the FURKA WoodUp staircase (left or right depending on configuration). Delivered raw and untreated, to be finished before use.

Main features

Feature	Description
Available species	oak, beech or laminated fir
Design	Traditional vertical spindles
Configuration	Upper quarter turn
Compatibility	FURKA WoodUp staircase
Finish	Raw wood – to be varnished, painted or oiled
Use	Indoor

Key points

✓ 3 available species: oak, beech or laminated fir depending on budget and aesthetics
✓ Traditional spindle design: classic aesthetic suited to all interiors
✓ Compatible with FURKA: designed and sized for this staircase
✓ Upper quarter turn configuration: left or right depending on your installation
✓ Raw wood: customisable with paint, varnish or stain

Installation advice

Install this handrail at the same time as the FURKA staircase for a consistent result. First fix the bottom and top posts, then the bottom rail, the spindles and finally the handrail. Check the final height of 90 cm (vertical measurement from the nosing).

Apply the finish to all components before final fixing. The handrail requires an abrasion-resistant finish (2-coat varnish recommended). The spacing between spindles must be less than 11 cm (standard NF P01-012).

Maintenance and protection

The wood is delivered raw and untreated. Apply a protective finish before heavy use – satin varnish (2 coats), oil-wax or polyurethane varnish depending on the desired appearance. The handrail, subject to frequent contact, particularly benefits from an abrasion-resistant varnish.

Annual maintenance with a product suited to the chosen finish is sufficient to preserve the appearance of the wood. Avoid abrasive products or solvent-based cleaners that damage finishes.

Frequently asked questions

Which wood species to choose between fir, beech and oak for this handrail?

Fir is the economical option, softer but sufficient for an indoor handrail with a protective finish. Beech is the traditional species for handrails: harder, abrasion-resistant, with a fine and regular grain. Oak is the premium choice: maximum lifespan, noble appearance, but higher price. For standard family use, beech offers the best quality/durability/price ratio.

Is this handrail compatible with staircases other than the FURKA?

The handrail is sized for the FURKA WoodUp staircase. Adaptation to other staircases of similar configuration (upper quarter turn) is possible by checking dimensional compatibility. Contact WoodUp with the precise measurements of your stairwell and staircase before ordering.

Can a different wood species be chosen from that of the staircase?

Yes, there is no obligation to match the wood species between the staircase and the handrail. Some owners choose oak for the handrail on a fir staircase for greater durability on the handrail, or for a contrasting aesthetic effect. Apply the same colour finish for visual harmony.

Is the handrail delivered assembled or as a kit?

The handrail is delivered as a kit to be assembled according to WoodUp instructions. Assembly requires a drill, wood bits, a spirit level and a mallet or hammer. Installation is accessible to a DIYer with basic experience. Allow 2 to 4 hours for installation depending on the configuration.

What safety standard applies to an indoor stair handrail?

In France, standard NF P01-012 applies to balustrades. For a private indoor staircase, the minimum height is 90 cm from the nosing. The spacing between spindles must prevent the passage of an 11 cm sphere. These are the minimum regulatory requirements for new builds.

See all our wooden spindle handrails