MORENO WITHOUT RISER + BALUSTRADE

MORENO STAIRCASE WITHOUT RISER + BALUSTRADE

Traditional MORENO staircase in fir, with or without risers.

MORENO Straight Staircase

€439.00

6 In stock Dispatched within 10 days

Riser

Handrail

PENDEDIS

€139.13

3 In stock Delivered to you in 10 days

€578.13 VAT included

Including €1.58 for ecotax

In stock Expédition sous 10j

Quantité

Straight fir staircase delivered as a kit, trimmable up to 285 cm. 15 treads, width 80 cm (82 cm with handrail), section 200x28 mm, recommended stairwell opening 85x273 cm. Available with or without risers and handrail. Indoor use only.

MORENO Straight Fir Staircase - Trimmable Kit 285 cm, 15 Treads

The MORENO straight staircase in solid fir is delivered as a kit for on-site assembly, with a maximum floor-to-floor height of 285 cm and 15 treads (including one flush landing tread). Its trimmable design allows the height to be adapted to the actual site configuration, within the limit indicated in the instructions. The width without handrail is 80 cm (82 cm with handrail), for a recommended stairwell opening of 85x273 cm. Tread height: 19 cm. Going: 18.3 cm. Tread section: 200x28 mm with risers, 220x28 mm without risers.

The fir is supplied untreated: a suitable interior protective finish must be applied after installation. The model is available with or without risers and with or without a handrail, depending on the version ordered. Anchor fixings are not supplied and must be chosen according to the substrate (concrete, wood, etc.). The floor footprint of 273 cm must be verified before ordering, taking into account finished floor coverings and ceiling finishes.

Main characteristics

Characteristic	Description
Type	Straight staircase, interior, trimmable kit
Wood species	Untreated natural fir
Max. floor-to-floor height	285 cm (trimmable according to instructions)
Number of treads	15 (including 1 flush landing tread)
Tread height	19 cm
Going	18.3 cm
Width	80 cm without handrail / 82 cm with handrail
Tread section	200x28 mm (with risers) / 220x28 mm (without risers)
Floor footprint	273 cm
Recommended stairwell opening	85x273 cm
Risers	With or without, your choice
Handrail	With or without, your choice — fixings included
Finish	Raw wood, to be treated after installation
Use	Interior use only
Delivery	Kit in 2 packages — see packaging section

Packaging

Version with risers and spindle handrail (width 80 cm)

? Package 1 — Stringers, handrail, newel post (bottom), newel post (top) | 24x410x13 cm | 35 kg
? Package 2 — 15 treads + 15 risers | 46x78x33 cm | 40 kg

Notched version without handrail, without risers (width 80 cm)

? Package 1 — Stringers | 405x23x7 cm | 20 kg
? Package 2 — 15 treads | 79x45x25 cm | 20 kg

Key points

? Trimmable: adjustment to floor-to-floor height within the limit of 285 cm, according to the instructions provided.
? Kit assembly: elements delivered unassembled for on-site assembly — instructions included.
? Combinable options: version with or without risers, with or without handrail, independently.
? Finish required: raw fir must receive a protective treatment (oil, varnish or interior paint) before first use.
? Indoor use only: access to upper floor, mezzanine, loft.

Installation advice

Dimension check: verify the floor-to-floor height (maximum 285 cm) and the available stairwell opening (85x273 cm recommended) before unpacking the kit. These measurements must be taken on finished floor and ceiling, including floor coverings.

Trimming: if the floor-to-floor height is less than 285 cm, trim the stringers from the bottom according to the cutting chart provided. Trimming affects the height of the first tread. Always check the result before final assembly.

Assembly: assemble the stringers, treads and risers according to the instructions provided, then fix securely to the floor and upper support. A minimum of two people is required to handle the stringers.

Anchoring: fix the stringers to the floor and upper support with fixings suited to the material (concrete, wood, etc.). Fixings are not supplied — allow for suitable wall plugs for the substrate.

Handrail: the handrail can be fitted after the staircase has been assembled. It is reversible — can be fitted on the right or left when going up, depending on your configuration.

Maintenance and protection

The raw fir supplied must receive a protective finish before first use to limit wear marks and make maintenance easier. Recommended options:

? Aqua-polyurethane staircase varnish: 2 to 3 coats, maximum resistance, renewal every 5 to 7 years
? Oil-wax: natural matt finish, maintenance every 1 to 2 years
? Interior paint: colour customisation, minimum 2 coats

Routine cleaning: slightly damp cloth, pH-neutral product. Avoid standing water on treads. Check fixing tightness once a year.

WoodUp tip

Before trimming the stringers, always check the floor-to-floor height on finished floor and ceiling — including floor covering, parquet, tiles, and suspended ceilings. A measurement error of a few centimetres can render the staircase impossible to trim once the stringers are too short.

Good to know before purchasing: the spindle handrail can be added after the staircase has been assembled — reversible left or right. You can therefore order the staircase without a handrail and add one later if needed.

Frequently asked questions

How do I trim the MORENO staircase to my floor-to-floor height?

Trimming is carried out on the stringers from the bottom, using the cutting chart provided in the instructions. Each centimetre removed alters the height of the first tread. For a floor-to-floor height of 270 cm for example, the trim is approximately 15 cm per stringer. Use a guided circular saw and work on both stringers simultaneously to ensure a perfectly level result.

What is the difference between the version with and without risers?

With risers, the staircase is closed: the vertical faces between the treads are clad, the structure is visually more solid and lets less dust through. Without risers, the staircase is open, visually lighter and allows light to pass through. Both versions use the same stringer, only the tread section changes (200x28 mm with / 220x28 mm without).

Is the 85x273 cm stairwell opening a minimum or a recommended dimension?

This is a recommended dimension for comfortable installation with fitting clearance. The strict minimum dimension is the staircase footprint (273 cm) + width (80 cm). In practice, allowing 5 cm extra in width and 2 cm in length makes it easier to adjust plumb without constraint.

Which staircase should I choose for a mezzanine with a floor-to-floor height of 260 cm?

The MORENO is suitable: it can be trimmed to 260 cm without difficulty (trimming approximately 25 cm from the stringers). For a height below 240 cm, the AULAC or BASSEYRE loft staircases, which are more compact, may be more suitable depending on the available floor space.

Should fir be treated before or after installation?

The finish should be applied after full installation, once the staircase is fixed and the handrail fitted. Treating before installation risks clogging the assembly areas and preventing adjustments. However, hidden surfaces (undersides of treads, inner faces of stringers) can be treated before assembly for complete protection.

Why choose the MORENO rather than a quarter-turn staircase?

The MORENO straight staircase is suitable when the stairwell opening is rectangular and aligned with the length of the staircase, with no change of direction. It is simpler to install and more affordable. A quarter-turn staircase is necessary when the floor space does not allow the full footprint (273 cm) to be aligned in a straight line, or when the room configuration requires a change of direction.

Our complementary staircases

NUGERE — Space-saving staircase with alternating treads, small footprint

CHEVALARD — Straight staircase in beech or fir, Standard range

FONTBRUNO oak — Straight staircase in glued laminated oak, 14 treads

Data sheet

Width (cm): 80
Species/material: Fir
Number of treads: 15
Section (mm): 220*28 (sans contremarche)
Section (mm): 200*28 (avec contremarches)
Footprint (cm): 273
Recommended stairwell opening (cm): 85*273
Floor-to-floor height (cm): 285
Step height (cm): 19
Range: Standard
Tread depth (cm): 18.3
Staircase type: Droit

Summary

The Pendedis balustrade is compatible with the MORENO & SUCHET staircases. It is an elegant and robust solution for securing your staircases. Comprising a handrail, straight spindles, a bottom rail and newel posts, it ensures safety and aesthetics through quality materials and a refined design.

Pendedis

Product overview

The Pendedis balustrade is an elegant and robust solution for securing your staircases and balustrades. Comprising a handrail, straight spindles, a bottom rail and newel posts, it adds a touch of sophistication to your interior while ensuring the necessary safety. Made from quality materials, the Pendedis balustrade is built to last.

Main features

Handrail: 3900x60x50 mm for a comfortable and secure grip
Spindles: 17 straight spindles of 800x55x20 mm, offering a solid and attractive barrier
Bottom rail: 3900x50x40 mm to reinforce the structure and stabilise the whole assembly
Newel posts: 2 newel posts of 1050x60x60 mm for a robust and stable fixing

Key points

Safety: Provides effective protection for your staircases and balustrades, preventing falls.
Aesthetics: Elegant design that harmonises with all interior decoration styles.
Durability: Made with quality materials for increased longevity.
Ease of installation: Complete kit including all the necessary components for a quick and easy installation.

Customer reviews

"easy to assemble, feels very solid" - Anonymous Customer.

Installation tips

Measure and mark the fixing points for the newel posts.
Secure the newel posts to the floor using suitable wall plugs and screws.
Install the bottom rail by securing it to the newel posts.
Place the straight spindles at regular intervals on the bottom rail.
Attach the handrail to the newel posts and spindles to complete the installation.

Buy now