CHEVALARD beech spindle handrail for straight staircase

Name: CHEVALARD beech spindle handrail for straight staircase
Brand: Levigne
SKU: RAFBDHE
Price: 324.09 EUR
Availability: PreOrder

CHEVALARD beech spindle handrail for straight staircase WoodUp. Wood spindles 65 x 20 mm, posts 70 x 70 mm, handrail 50 x 50 mm, bottom rail 50 x 35 mm, screwware included. Beech LC delivered raw and untreated, to be varnished (2 coats recommended for the handrail subject to contact) or painted before use. Reversible: can be fitted on the right or left when going up depending on the staircase configuration. Interior use only.

Reference RAFBDHE

€324.09 incl. tax

Including €1.13 for ecotax

Restocking in progress

Quantité

Paiement :

Paiement en 2x, 3x, 4x avec

CHEVALARD beech spindle handrail straight

The CHEVALARD beech spindle straight handrail is a wood spindle handrail 65 x 20 mm for the straight staircase. It includes wood spindles 65 x 20 mm, 70 x 70 mm posts, a 50 x 50 mm handrail and a 50 x 35 mm bottom rail. Screwware included. Available in Beech.

Interior use only — LC wood species are not intended for outdoor use. To be installed simultaneously with the staircase.

Main characteristics

Characteristic	Description
Compatible staircase	Straight staircase (ID NC)
Position	Reversible - right or left when going up
Wood spindles	65 x 20 mm
Posts	70 x 70 mm
Handrail	50 x 50 mm
Bottom rail	50 x 35 mm
Available wood species	Beech
Screwware	Included
Reversibility	Reversible
Use	Interior use only

Key points

✓ Wood spindles 65x20 mm : warm traditional aesthetic
✓ Reversible : right or left depending on the configuration
✓ Available wood species : Beech
✓ Screwware included : complete fitting kit
✓ Reversible : right or left when going up

Installation advice

To be installed simultaneously with the staircase. Fix posts, bottom rail, spindles then handrail in that order. Check the height of 90 cm minimum from the nosing and the spacing less than 11 cm (standard NF P01-012). Apply varnish or paint before final fixing. Two people recommended.

Maintenance and protection

The wood is delivered raw and untreated. Apply a protective finish before use: 2-coat satin varnish (maximum resistance), oil-wax (natural look, renewal every 1-2 years) or paint. The handrail, subject to frequent contact, benefits from an abrasion-resistant varnish.

Annual maintenance with a product suited to the chosen finish. Avoid abrasive or solvent-based products.

Frequently asked questions

Can this handrail be fitted on the right or left of the staircase?

Yes, this handrail is reversible — it can be installed on the right or left when going up depending on your configuration. No modification is required.

What finish should be applied to this wooden handrail?

The handrail requires a finish resistant to abrasion: 2-coat satin varnish is recommended. Oil-wax or paint for the spindles and posts depending on the décor. Apply the finish before final fixing.

Does the spacing between the spindles comply with the safety standard?

The spacing must be less than 11 cm (standard NF P01-012). Check the actual spacing after installation. The minimum height of the handrail is 90 cm from the nosing.

Should the wood be treated before or after installation?

Beforehand, preferably: apply the finish to all components before final fixing to also treat hidden areas. Allow to dry completely before fixing.

Is the screwware included sufficient to fix the handrail to the steps?

The included screwware covers the assembly of the handrail components together. For fixing to the steps and floor, provide screws or coach screws suited to the staircase material (wood: screws 5x60 mm min., concrete: plug + stainless steel screws).

See all our wood spindle handrails