Bavat + Varnish
Pack contents
Top quarter turn staircase supplied as a kit, height 280 cm. 14 treads, width 80 cm.
BAVAT staircase in glued laminated beech – top quarter turn staircase kit 80 cm
The BAVAT HETRE staircase is a top quarter turn staircase intended for indoor use. It is supplied as a kit: workshop-machined elements, to be assembled on site according to the instructions. The top quarter turn configuration allows a change of direction at the top, which is useful when a straight staircase cannot be installed along the full length. The model is designed for a floor-to-floor height of 280 cm, a width of 80 cm and a recommended stairwell opening of 273 × 82 cm. It features 13 + 1/2 treads with a going of 19 cm and a tread height of 20 cm. The indicated tread thickness is 3 cm. The product is available with or without risers depending on the variant.
Main characteristics
| Characteristic | Description |
|---|---|
| Staircase type | Top quarter turn |
| Species / material | Glued laminated beech |
| Range | Standard |
| Width (cm) | 80 |
| Floor-to-floor height (cm) | 280 |
| Recommended stairwell opening (cm) | 273 × 82 |
| Footprint (cm) | 273 |
| Number of treads | 13 + 1/2 |
| Tread height (cm) | 20 |
| Going (cm) | 19 |
| Tread thickness (cm) | 3 |
Key points
- Top quarter turn: change of direction at the top to adapt the layout to the stairwell opening.
- Tread parameters: going 19 cm and tread height 20 cm (as per product datasheet).
- Two variants: with or without risers.
- Kit to assemble: workshop-machined elements, assembled on site according to the instructions.
Installation advice
- Check dimensions: verify the floor-to-floor height (280 cm) and the recommended stairwell opening (273 × 82 cm) before fitting, taking finishes into account.
- Choose the orientation: select "top left" or "top right" according to the site configuration.
- Dry assembly: fit the staircase, check alignment, level and plumb.
- Fix the assembly: anchor to the floor and load-bearing supports using fixings appropriate to the substrate (wood, concrete, etc.).
- Finish: apply an interior-suitable protection before or after fitting depending on the chosen finishing product.
Packaging
Version without risers
| Element | Dimensions (mm) | Weight (kg) |
|---|---|---|
| Stringers for top quarter turn | 3060 × 220 × 70 | 29 |
| Top quarter turn module + stringers | 1060 × 570 × 100 | 34 |
| Top quarter turn newel post | 2000 × 150 × 80 | 12 |
| Treads without groove | 770 × 330 × 220 | 38 |
Version with risers
| Element | Dimensions (mm) | Weight (kg) |
|---|---|---|
| Stringers for top quarter turn | 3060 × 220 × 70 | 29 |
| Top quarter turn module + stringers + risers | 1060 × 550 × 120 | 40 |
| Top quarter turn newel post | 2000 × 150 × 80 | 12 |
| Treads with groove | 770 × 330 × 220 | 38 |
| Risers | 750 × 200 × 220 | 23 |
Maintenance and protection
- Protection: apply an interior finish (oil, varnish or hardener) suited to the use of the treads.
- Cleaning: soft slightly damp cloth; avoid abrasive products.
- Inspection: periodically check the tightness of fixings and the condition of the finish.
Frequently asked questions
How do I install the BAVAT HETRE staircase?
Check the floor-to-floor height (280 cm) and the recommended stairwell opening (273 × 82 cm), choose the orientation of the turn (top left/right), assemble according to the instructions then secure the whole to the floor and load-bearing supports using appropriate fixings.
What is the lifespan of the BAVAT HETRE staircase?
Indoors, the service life depends on traffic, the quality of the fixings and the finish applied. An appropriate finish and regular maintenance will limit tread wear.
Is BAVAT HETRE compatible with a stairwell opening of 273 × 82 cm?
The product datasheet indicates a recommended stairwell opening of 273 × 82 cm. Check the finished opening (including coverings and linings) before ordering.
Which staircase should you choose when the access must turn at the top?
A top quarter turn is suitable when the change of direction occurs in the upper section, particularly to align with a corridor or an angled arrival.
Why choose BAVAT over a straight staircase?
A straight staircase requires a stairwell opening aligned along its entire length. The top quarter turn allows the layout to be adapted with a change of direction at the top, depending on the configuration of the space.
Data sheet
- Width (cm)
- 80
- Species/material
- Glued laminated beech
- Number of treads
- 13+1/2
- Footprint (cm)
- 273
- Recommended stairwell opening (cm)
- 273 x 82
- Floor-to-floor height (cm)
- 280
- Step height (cm)
- 20
- Range
- Standard
- Tread depth (cm)
- 19
- Number of parcels
- 4
- Step thickness (cm)
- 3
- Staircase type
- Top quarter turn
The Aqua Polyurethane Gel Formula Floor & Stair Varnish is designed to protect and enhance your wooden floors and staircases. Its water-based gel formula makes it easy to apply, without dripping, on all surfaces. This varnish resists moisture, scratches and repeated foot traffic, guaranteeing lasting protection while preserving the natural charm of the wood.
Aqua Polyurethane Gel Formula Floor & Stair Varnish
The Aqua Polyurethane Gel Formula Floor & Stair Varnish is an ideal solution for finishing and protecting your wooden floors and staircases. This water-based product is specially formulated to offer lasting protection against daily wear while preserving the natural appearance of the wood.
Key Features
- Gel formula: Easy to apply without dripping, ideal for vertical and horizontal surfaces.
- Lasting protection: Resists repeated foot traffic, moisture, and scratches, thus extending the beauty and life of your woodwork.
- Application: Can be applied by brush or roller, with minimal surface preparation required.
- Environmentally friendly: Water-based formula, less harmful to the environment and the user.
User Reviews
Users particularly appreciate the ease of application of the varnish thanks to its gel formula that does not run. They also note its effectiveness in protecting surfaces against daily wear, while enhancing the natural aesthetic of the wood.
Data sheet
- Yield
- 10 m²/L/coat
- Finish type
- Varnish
- Net Weight
- 1,000000
You might also like
PARQUET & STAIRCASE VARNISH Environment
8 other products in the same category:
No customer questions for the moment.






4
In stock
Dispatched within 10 days