PUECH CHENE railing oak spindles straight staircase

Name: PUECH CHENE railing oak spindles straight staircase
Brand: Levigne
SKU: RAFBDCH
Price: 445.1 EUR
Availability: PreOrder

PUECH CHENE railing oak spindles straight staircase for FONTRUNEAU straight staircase WoodUp. Wood spindles 65 x 20 mm, newel posts 70 x 70 mm, handrail 50 x 50 mm, bottom rail 50 x 35 mm, fixings included. Oak LC supplied raw and untreated, to be varnished (2 coats recommended for the handrail subject to contact) or painted before use. Reversible: can be fitted on the right or left when going up depending on the staircase configuration. Interior use only.

Reference RAFBDCH

€445.10 incl. tax

Including €1.19 for ecotax

Out of stock

Quantité

Paiement :

Paiement en 2x, 3x, 4x avec

Description
Product Details

PUECH CHENE railing oak spindles straight staircase

The PUECH CHENE railing oak spindles straight staircase is a wood spindle railing 65 x 20 mm for the FONTRUNEAU straight staircase. It includes wood spindles 65 x 20 mm, 70 x 70 mm newel posts, a 50 x 50 mm handrail and a 50 x 35 mm bottom rail. Fixings included. Available in Oak LC.

Interior use only — LC species are not intended for outdoor use. To be installed simultaneously with the staircase.

Main features

Feature	Description
Compatible staircase	FONTRUNEAU straight (ID 37)
Position	Reversible — right or left when going up
Wood spindles	65 x 20 mm
Newel posts	70 x 70 mm
Handrail	50 x 50 mm
Bottom rail	50 x 35 mm
Available species	Oak LC
Fixings	Included
Reversibility	Reversible
Use	Interior use only

Key points

✓ Wood spindles 65x20 mm: warm traditional aesthetic
✓ Reversible: right or left depending on the configuration
✓ Available species: Oak LC
✓ Fixings included: complete kit for installation
✓ Reversible: right or left when going up

Installation advice

To be installed simultaneously with the staircase. Fix the newel posts, bottom rail, spindles then handrail in that order. Check a minimum height of 90 cm from the stair nosing and a spacing of less than 11 cm (standard NF P01-012). Apply varnish or paint before final fixing. Two people recommended.

Maintenance and protection

The wood is supplied raw and untreated. Apply a protective finish before use: satin varnish 2 coats (maximum resistance), oil-wax (natural finish, renewal every 1–2 years) or paint. The handrail, subject to frequent contact, benefits from an abrasion-resistant varnish.

Annual maintenance with a product suitable for the chosen finish. Avoid abrasive or solvent-based products.

Frequently asked questions

Can this railing be fitted on the right or left side of the staircase?

Yes, this railing is reversible — it can be installed on the right or left when going up, depending on your configuration. No modification is required.

What finish should be applied to this wooden railing?

The handrail requires an abrasion-resistant finish: satin varnish 2 coats is recommended. Oil-wax or paint for the spindles and newel posts depending on the décor. Apply the finish before final fixing.

Does the spindle spacing comply with the safety standard?

The spacing must be less than 11 cm (standard NF P01-012). Check the actual spacing after installation. The minimum handrail height is 90 cm from the stair nosing.

Should the wood be treated before or after installation?

Before, preferably: apply the finish to all components before final fixing to also treat hidden areas. Allow to dry completely before fixing.

Are the included fixings sufficient to secure the railing to the treads?

The included fixings cover the assembly of the railing components together. For fixing to the treads and floor, allow for screws or coach bolts suitable for the staircase material (timber: screws 5x60 mm min., concrete: plug + stainless steel screws).

See all our wood spindle railings