ASCLIER Stainless Steel Polycarbonate Canopy

Name: ASCLIER Stainless Steel Polycarbonate Canopy
Brand: Levigne
SKU: OPA700G
Price: 269 EUR
Availability: PreOrder

ASCLIER canopy in stainless steel and 3 mm multiwall polycarbonate. Available in two sizes: 140 x 90 cm or 180 x 90 cm. Sleek contemporary design, 80 cm fixing-centre spacing, fixings included. Corrosion-resistant stainless steel frame and a clear panel that lets natural light through. Where external wall insulation is present, fixings must reach the load-bearing wall. A load-bearing wall support is essential; check its load capacity before installation.

Length (cm)

Reference OPA700G

€269.00 incl. tax

Made to order. Lead time 5-6 weeks

Quantité

Paiement :

Paiement en 2x, 3x, 4x avec

ASCLIER door canopy in stainless steel and cellular polycarbonate

The ASCLIER door canopy is made from stainless steel and 3 mm multiwall polycarbonate and comes in two sizes: 140 x 90 cm and 180 x 90 cm. Stainless steel offers good corrosion resistance without treatment. The clear polycarbonate panel lets light into the entrance.

Sleek contemporary design, 80 cm fixing-centre spacing, fixings included. Suitable for modern façades.

Main characteristics

Characteristic	Description
Materials	Stainless steel + cellular polycarbonate
Available dimensions	140 x 90 cm or 180 x 90 cm
Panel thickness	3 mm
Style	Contemporary and clean-lined
Centre spacing	80 cm
Fixings	Included

Key points

✓ Stainless steel: frame requires no treatment or painting
✓ 2 dimensions: 140 or 180 cm to suit the width of the door
✓ Transparent panel: natural light preserved under the canopy
✓ Low maintenance: stainless steel frame with good corrosion resistance
✓ Contemporary design: clean lines for modern façades

Installation advice

The centre spacing of 80 cm must be measured precisely above the door. The fixing wall must be load-bearing (concrete, brick, breeze block) - never fix to thermal insulation or lightweight cladding without checking the structural resistance. Use wall plugs suited to the wall material.

Two people are recommended for installation. Stainless steel can be slippery to handle - use gloves. Check the level after fixing the supports to ensure a straight installation.

Maintenance and protection

The stainless steel frame resists corrosion without any special treatment. Cleaning it once a year with clean water is sufficient for routine maintenance. In coastal or industrial environments (salty or polluted air), clean it twice a year and check the fixings for rust spots.

Clean the polycarbonate panel with a soft damp cloth only; avoid abrasive products that could scratch the surface. Inspect the fixings once a year.

Frequently asked questions

What is the difference between the ASCLIER stainless steel canopy and the CABRUNAS galvanised steel canopy?

The ASCLIER in stainless steel resists corrosion better than the CABRUNAS in galvanised steel, particularly in coastal, damp or industrial environments. Stainless steel requires no treatment even after many years of exposure. The CABRUNAS is sufficient for standard use, but by the sea or in a very damp area, the ASCLIER is preferable. Both have the same size and the same panel thickness (3 mm).

Is the ASCLIER canopy compatible with an external thermal insulation (ETI) façade?

No, direct fixing to external thermal insulation is insufficient to support the weight of the canopy. The wall plugs must pass through the insulation and fix into the load-bearing wall behind. Special ETI wall plugs with a long shaft exist for this type of configuration - to be used with the precise insulation measurements of your façade.

Can the ASCLIER canopy be installed without calling on a tradesman?

Yes, installation is accessible to a DIYer with a drill, drill bits suited to the wall material, and a spirit level. The kit includes the fixings. Two people are recommended to hold the canopy during fixing. If your wall is made of uncertain material (old stone, rammed earth), consult a professional for the fixings.

Which size to choose between 140 cm and 180 cm for the ASCLIER canopy?

Choose according to the width of your entrance door. The 140 cm version is suitable for doors up to approximately 110 cm wide with a 15 cm overhang on each side. The 180 cm version is recommended for wider doors or if you wish to have greater lateral protection for visitors.

Does the 3 mm polycarbonate panel withstand snow and impacts?

The 3 mm cellular polycarbonate supports a moderate snow load. For regions with heavy snowfall, a thicker panel (6 mm as on the ESCRINET canopy) is preferable. In the event of heavy hail, the polycarbonate may become slightly marked but resists without breaking - unlike acrylic glass which is more fragile under impact.

See all our canopies and awnings