Your cart
There are no more items in your cart
Douglas Fir Wicket Gate 120x100 cm Moulded Boards - Kit
Wicket gate kit in natural untreated Douglas fir, 120x100 cm, 150x24 mm section. 6 moulded boards, 3 rails, 108 stainless steel screws. 1 parcel of 25 kg. Moulded boards providing a structured relief. Fixing hardware (hinges, latch) not included - to be provided according to the support and use. Posts not supplied. Exterior oil treatment recommended before installation. Outdoor use. The moulded boards provide a crafted relief that distinguishes this wicket gate from the straight-board model.
Douglas Fir Wicket Gate 120x100 cm Moulded Boards - 150x24 mm Section, 25 kg Kit
This kit wicket gate is made from natural untreated Douglas fir, dimensions 120x100 cm (H x W), section 150x24 mm. It includes 6 moulded boards, 3 rails and 108 stainless steel screws. Delivered in 1 parcel of 1200x150x220 mm. Assembled leaf weight: 25 kg. Fixing hardware (hinges, latch) is to be provided separately. The moulded boards provide a structured relief that distinguishes this model from the straight-board wicket gate. The substantial 150x24 mm section provides superior strength compared to standard 91x21 mm sections.
Key features
| Specification | Description |
|---|---|
| Species | Natural untreated Douglas fir |
| Dimensions | 120x100 cm (H x W) |
| Timber section | 150x24 mm |
| Composition | 6 moulded boards, 3 rails, 108 stainless steel screws |
| Packaging | 1 parcel: 1200x150x220 mm - 25 kg |
| Fixing hardware | Not included - hinges and latch to be provided |
| Treatment | Exterior oil recommended - treatment not mandatory |
| Use | Exterior - garden, fencing, entrance |
Key points
- ✓ 150x24 mm section: greater thickness for improved rigidity
- ✓ Moulded boards: structured profile distinguishing this model from the straight-board wicket gate
- ✓ 108 stainless steel screws: durable assembly with no risk of rust
- ✓ Natural Douglas fir: class 3 durability, no mandatory chemical treatment
- ✓ Complete kit: boards, rails and screws supplied - ready to assemble
Installation advice
Assemble the wicket gate on a flat surface. Fix the 3 rails first, then the 6 moulded boards with the stainless steel screws provided, pre-drilling first. The diagonal brace is not included in this kit — add a diagonal piece of timber if the leaf will be subject to intensive use to prevent warping. Fit the hardware (heavy adjustable hinges) capable of bearing the weight of the finished leaf (approximately 25 to 30 kg). Apply Douglas oil before installation to maintain the colour.
Maintenance and protection
Douglas fir greys in 6 to 12 months with no loss of strength. Apply an exterior Douglas oil once a year to preserve the colour. Check the tightness of the rail screws and the alignment of the wicket gate every spring. The stainless steel fixings require no particular maintenance.
Frequently asked questions
What is the difference between the moulded-board and straight-board wicket gates?
The moulded-board model has a relief profile on the visible face, giving a more structured appearance. The straight-board model has a plain, clean, contemporary surface. The dimensions, section and composition are identical.
What hardware is needed for this 25 kg wicket gate?
Allow for adjustable hinges capable of supporting a minimum of 30 kg (the assembled leaf weighs 25 kg) (2 hinges per leaf), a latch or bolt depending on use, and a pull handle. Choose stainless steel or galvanised steel hardware.
Can this wicket gate be motorised?
Yes, for a single-leaf wicket gate of 100 cm, a suitable electric actuator is feasible. The 25 kg weight is within the standard range for wicket gate motorisation. Consult an installer for compatibility.
Are the moulded boards visible from both sides?
The moulding is generally single-face (façade side). The inner face shows the boards in a flat profile. Check this point at the time of ordering if the appearance on both sides is important for your installation.
Does this kit include a diagonal reinforcement brace?
No. This kit includes only the 6 boards, 3 rails and 108 stainless steel screws. For very frequent use or windy exposures, add a diagonal piece of timber from corner to corner.
- Species/material
- Douglas
- Length (cm)
- 100
- Section (mm)
- 150*24
- Height
- 120
R6K100DM
3 Products
New
No questions yet.
Your question has been successfully sent to our team. Thank you for the question!
Ask a question
hide the form
Dispatch within 10 days
Dispatch within 10 days when the product is in stock *.
* Except bespoke products
Dispatched within 6-8 weeks
Dispatched within 6-8 weeks for personalised and made-to-measure products.
Secure payment
Payment in 1 or 3 instalments at no extra cost. Bank transfer, cheque or PayPal
Satisfied or refunded
Satisfied or refunded if returned within 14 calendar days (Sundays and public holidays included) following delivery.
8 other products in the same category:
No questions yet.
Your question has been successfully sent to our team. Thank you for the question!
Ask a question
hide the form
Tap to zoom
