Pine batten for wardrobe door frame
Raw solid pine batten, 75 x 45 mm cross-section, rounded edges, planed finish, natural shade variable between pieces, 4 lengths: 75, 150, 210 and 260 cm, sold individually. Designed for framing and fitting Woodup wardrobe doors – can be cut to size with a saw to the exact dimensions of the project, to be painted or varnished to the desired finish. Not supplied with the doors – order in the quantities required for the complete frame of each wardrobe opening.
Solid Pine Timber Batten 75x45 mm – Wardrobe Door Frame, 4 Lengths
Timber batten in unfinished solid pine, 75 x 45 mm section, with rounded edges and a planed finish. Available in 4 lengths: 75, 150, 210 and 260 cm; sold individually. Designed for framing Woodup wardrobe doors – can be sawn to the exact dimensions required. As solid pine is a natural material, colour may vary slightly between battens, particularly if ordered separately.
For a standard frame: 2 lengths of 210 cm trimmed to height and 1 length of 75 cm trimmed to width. Paint or varnish to achieve your chosen finish. Not supplied with the doors – order separately according to the number of openings to frame.
| Feature | Description |
|---|---|
| Material | Solid pine |
| Section | 75 x 45 mm |
| Finish | Unfinished, planed, with rounded edges |
| Available lengths | 75 cm / 150 cm / 210 cm / 260 cm |
| Can be trimmed | Yes – can be sawn to suit your project’s dimensions |
| Sold | Individually |
| Main use | Wardrobe door frame |
| Door included? | No – sold separately from the wardrobe doors |
| Use | Indoor use |
Packaging
- Sold individually
- Wardrobe door not included – order separately
Key features
- ✓ 75x45 mm section: standard size for wardrobe door frames
- ✓ Rounded edges: a neat finish with no sharp edges, ready to install
- ✓ 4 lengths: 75 to 260 cm to suit all standard door heights
- ✓ Can be trimmed: adjustable to the exact height and width of the frame
- ✓ Unfinished solid pine: can be painted, stained or varnished to suit your décor
Installation advice
Carefully measure the height and width of the frame before cutting the timber battens. For a standard frame, cut 2 battens to the door height (side uprights) and 1 batten to the width (top crosspiece). Pre-drill the battens before screwing them in to prevent the solid pine from splitting. Fix the side uprights first, then the top crosspiece. You can mitre the joints for a neater finish. Apply a finish (paint or wood stain) after assembly to protect the wood and give the frame a consistent appearance.
Care and protection
The unfinished timber batten can be painted or stained in your chosen colour. For routine care of a painted frame, a slightly damp cloth is sufficient. To match the batten’s colour to the wardrobe doors, opaque paint is the most reliable option: wood stain or clear varnish will show the natural variations in each solid pine board. Check the fixings are tight once a year, especially if changes in the room’s climate cause the wood to move.
Frequently asked questions
How many timber battens are needed to frame a standard wardrobe door?
For a standard frame (2 uprights + 1 top crosspiece), you need 2 lengths of 210 cm (trimmed to height) and 1 length of 75 cm (trimmed to width). For a height of 260 cm, choose 260 cm lengths for the uprights.
Is this timber batten compatible with all Woodup wardrobe doors?
Yes. This timber batten is designed as an accessory for Woodup wardrobe doors (folding, trimmable and louvred). It can also frame similarly sized door leaves from other brands.
Can this timber batten be painted white to match a lacquered door?
Yes. Unfinished, planed solid pine takes paint well. Sand with 120-grit abrasive, apply a wood primer, then your white satin paint. The planed finish provides a good surface for the paint to adhere to.
Which length should I choose for a 205 cm high door?
Choose the 210 cm length for the side uprights. You can trim it precisely to 205 cm (or your required clear height). The 75 cm length is sufficient for the horizontal crosspiece of a standard 61 to 71 cm opening.
Will the timber batten be exactly the same colour as the wardrobe door?
Not necessarily when unfinished: solid pine is a natural material, so each piece has its own colour and grain. For a perfectly uniform appearance, apply the same opaque paint to the batten and the door. With wood stain or clear varnish, slight differences in shade may remain.
When is this timber batten needed, and when can it be left out, depending on the door model?
Woodup folding doors Folding louvred door are fixed directly to the ceiling and floor using their own track – no frame is needed. The timber batten is useful for trimmable or sliding door leaves installed in an unfinished opening without a door frame: it provides a fixing point for hinges and gives the edges of the opening a finished look. Order it only if the opening does not already have a frame.
Folding louvred wardrobe door Folding louvred door
No questions yet.
Dispatch within 10 days when the product is in stock *.
* Except bespoke products
Dispatched within 6-8 weeks for personalised and made-to-measure products.
Payment in 1 or 3 instalments at no extra cost. Bank transfer, cheque or PayPal
Satisfied or refunded if returned within 14 calendar days (Sundays and public holidays included) following delivery.
8 other products in the same category:
No questions yet.





