Louvred Folding Wardrobe Door in Solid Pine
Folding louvred solid pine wardrobe door, thickness 21 mm, height 205 cm, widths 61 or 71 cm. Open slats for natural wardrobe ventilation, smooth raw pine finish ready to paint, varnish or stain; naturally variable shade from one piece to another. Top rail, top and bottom pivots, pre-fitted hinges and fixings included. Non-trimmable – a clearance of 209.5 cm in height is essential for the rail; width must be selected according to the exact wardrobe opening before ordering.
Folding Louvred Solid Pine Wardrobe Door 21 mm – Height 205 cm
The folding louvred wardrobe door in natural solid pine 21 mm is available in 2 widths: 61 cm or 71 cm (2 panels of 30.5 cm or 35.5 cm), for a fixed height of 205 cm. The open slats ensure continuous natural ventilation of the wardrobe without a technical grille.
The hardware is complete upon delivery: pre-fitted hinges on the panels, top rail, top and bottom pivots, knobs. Smooth raw wood finish, ready to paint or varnish. As solid pine is a natural material, each panel has its own grain and a shade that may vary slightly from one piece to another: this variation is normal and does not constitute a defect. Non-trimmable model: allow 209.5 cm in height and the chosen width + 4 mm.
| Feature | Description |
|---|---|
| Material | Natural solid pine |
| Thickness | 21 mm |
| Available widths | 61 cm or 71 cm |
| Height | 205 cm (excluding rail) |
| Panel type | Open louvred – integrated natural ventilation |
| Finish | Smooth raw wood – to be painted or varnished – naturally variable shade and grain |
| Hinges | Pre-fitted on the panels |
| Trimmable | Non-trimmable |
| Required opening | 209.5 cm in height, door width + 4 mm |
| Use | Interior use only |
Packaging
- Supplied with pre-fitted hinges, top rail, top and bottom pivots, knobs
- Sold as a pair (2 panels)
Key features
- ? Natural ventilation: louvred slats ensuring air circulation in the wardrobe
- ? Space-saving: folding opening without encroaching on the room
- ? Pre-fitted hinges: quick installation, no prior assembly required
- ? Complete hardware included: top rail, pivots, knobs – no additional purchase required
- ? Two widths: 61 or 71 cm to fit standard openings
- ? Raw finish: paintable or varnishable to suit your décor
Installation advice
Check that your opening measures 209.5 cm in height to accommodate the door and the top rail. Allow 4 mm clearance in width on each side for correct panel alignment. First fix the top rail to the ceiling of the frame, then position the bottom pivots. Then hang the panels by clipping onto the pivots and check the alignment. This model cannot be cut down: the dimension must match your opening without any cutting. For installation with a frame, pair this model with the Woodup pine battens Wardrobe door frame batten.
Maintenance and protection
In a natural raw finish, the pine can be left as is or treated with a varnish, a wood stain or paint. A light sanding with 120-grit paper before application improves finish adhesion. For routine maintenance, a dry cloth is sufficient. Dust the louvred slats two to three times a year with a soft brush or a microfibre cloth to prevent build-up between the slats. As solid pine is a living wood, its shade and grain vary naturally from one panel to another, including between the two panels of the same door. An opaque coat of paint fully evens out the appearance, whereas a wood stain or varnish allows this variation to show through, which is part of the character of solid wood. As these doors are intended for interior use, no water-repellent treatment is required.
Frequently asked questions
What opening height is required for a 205 cm door?
Allow 209.5 cm in height: 205 cm for the door plus the space required for the top rail. Without this clearance, the rail cannot be fitted correctly.
Is the hardware included in the delivery?
Yes. The kit supplied includes the pre-fitted hinges, the top rail, the top and bottom pivots, and the pull knobs. No additional accessory purchase is required for standard installation.
Why is the wood shade not identical on all door panels?
Solid pine is a natural material, and each board has its own shade and grain depending on the cut and growth of the tree. These shade differences between panels are inherent to solid wood and do not constitute a manufacturing defect. For a perfectly uniform shade, apply an opaque paint rather than a wood stain or transparent varnish, which preserve this natural variation.
Can this door be cut down to fit a smaller opening?
No. This model cannot be cut down. For a height of less than 205 cm, please refer to the trimmable doors in the Woodup range (Trimmable natural pine door or Trimmable white lacquered door).
What is the difference between the folding louvred door and the folding half-louvred door?
The louvred door Folding louvred door is fully open-slatted across the entire height of the panel. The half-louvred door Folding half-louvred door alternates a solid section at the top with louvred slats at the bottom. The choice depends on the level of ventilation desired and the preferred visual appearance.
Are these doors suitable for a utility room or a dressing room?
Yes, their natural ventilation makes them particularly suitable for wardrobe storage spaces, utility rooms and dressing rooms. Avoid rooms exposed to permanent humidity without ventilation, such as a bathroom without an extractor fan.
No questions yet.
You might also like
Dispatch within 10 days when the product is in stock *.
* Except bespoke products
Dispatched within 6-8 weeks for personalised and made-to-measure products.
Payment in 1 or 3 instalments at no extra cost. Bank transfer, cheque or PayPal
Satisfied or refunded if returned within 14 calendar days (Sundays and public holidays included) following delivery.
8 other products in the same category:
No questions yet.






