Half-louvred folding wardrobe door in solid pine

Name: Half-louvred folding wardrobe door in solid pine
Brand: Levigne
SKU: PDEC
Price: 129 EUR
Availability: PreOrder

Half-louvred folding wardrobe door in solid pine 21 mm, height 205 cm, widths 61 cm or 71 cm, rail, pivots, knobs and screws included. Solid lower section for visual privacy, louvred upper section for ventilation - hinges pre-fitted to panels, full hardware supplied with no additional purchase required. Non-trimmable - check available height clearance before ordering and select the width to match your opening.

Width (cm)

Reference PDEC06

€129.00 incl. tax

Restocking in progress

Quantité

Paiement :

Paiement en 2x, 3x, 4x avec

Half-Louvred Folding Wardrobe Door in Solid Pine 21 mm - Partial Ventilation

The half-louvred folding wardrobe door in solid pine 21 x 32 mm, height 205 cm, is available in 61 cm (2 x 30.5 cm) or 71 cm (2 x 35.5 cm). Solid lower section for visual privacy, louvred upper section for natural ventilation.

Supplied with pre-fitted hinges, top rail, pivots, knobs and full screws for the top of the door. Non-trimmable model - allow 4 to 4.5 cm of clearance above the opening for the rail. For different widths, refer to the trimmable door panels.

Specification	Description
Material	Solid pine - section 21 × 32 mm
Thickness	21 mm
Available widths	61 cm (2 × 30.5 cm) or 71 cm (2 × 35.5 cm)
Height	205 cm excluding rail
Panel type	Half-louvred - upper part louvred, lower part solid
Hinges	Pre-fitted to the door panels
Included hardware	Top rail, top and bottom pivots, knobs, screws
Trimmable	Non-trimmable
Required clearance	4 to 4.5 cm above the opening for the rail
Use	Interior use - not suitable for unventilated damp rooms

Packaging

Supplied with pre-fitted hinges, top rail, top and bottom pivots, knobs, screws
Sold as a pair (2 panels)

Key features

✓ Half-louvred: partial ventilation with better visual privacy than a fully louvred model
✓ Pre-fitted hinges: panels ready to hang, no prior assembly required
✓ Complete hardware: door top rail, pivots, knobs, screws - ready to install immediately
✓ Smooth movement: rail + pivot system, silent and stable
✓ Ideal for: bedrooms, dressing rooms, utility rooms, hallways

Installation tips

Allow 4 to 4.5 cm of clearance above the opening to fix the top rail. Fit the rail first, then position the top and bottom pivots according to the supplied template. Clip the door panels onto the pivots and check alignment: both panels must be parallel and meet without forcing in the centre. An assembly video is available on the Woodup website to guide you through the installation step by step.

Maintenance and protection

Dust the louvred slats two to three times a year with a soft brush or microfibre cloth. For the solid pine section in raw finish, a dry cloth is sufficient for everyday cleaning. If the door has been painted or varnished, cleaning with mild soapy water (neutral pH) is suitable. Avoid abrasive products that could scratch the finish. If the pivots squeak, a light application of wax lubricant is sufficient to restore smooth movement.

Frequently asked questions

What is the difference between a louvred door and a half-louvred door?

The louvred door Folding louvred door is fully louvred across its entire height. The half-louvred door Folding half-louvred door has a solid upper section and a lower section with louvred slats. The half-louvred door offers greater visual privacy while maintaining good air circulation.

Can these doors be installed in a utility room?

Yes, provided the room is properly ventilated. These doors are not suitable for spaces exposed to permanent humidity without air extraction.

Can the door be trimmed to fit a smaller height?

No, this model is not trimmable. For a different opening height, refer to the trimmable doors in the range (Trimmable natural pine door in natural pine, Trimmable white lacquered door in white lacquer).

How long does installation take?

Someone with standard tools (drill, spirit level, screws) can install these doors in 30 to 60 minutes. As the hinges are pre-fitted and the hardware is supplied, no complex preparation is required. The Woodup assembly video details each step.

Are these doors suitable for a wardrobe with no existing frame?

Yes, provided there is a flat surface at the top of the opening to fix the rail (4 to 4.5 cm clearance required). For a neat finish with a visible frame, pair these doors with the Woodup pine battens Wardrobe door frame batten.

Battens for wardrobe door frame

All our wardrobe doors