Raw solid pine batten, 75×45 mm cross-section, rounded edges and planed finish. 4 available lengths: 75, 150, 210 and 260 cm. Sold individually, trimmable with a saw to fit precisely to the height and width of your frame. Example: 2 lengths of 210 cm for the uprights + 1 length of 75 cm for the top rail. Compatible with paint and stain. Sold without door. Interior use only.
This raw solid pine batten with a 75×45 mm cross-section is designed for creating wardrobe door frames. Its rounded edges and planed finish allow for a clean installation without further machining. It is available in 4 lengths: 75 cm, 150 cm, 210 cm and 260 cm. Sold individually, it can be cut to the required dimensions.
In the example photo: a typical use employs 2 lengths of 210 cm cut to door height and 1 length of 75 cm cut to width, to form a complete frame around a wardrobe door panel. This batten is also suitable for other interior joinery projects requiring a solid piece of wood with a rectangular cross-section.
| Characteristic | Description |
|---|---|
| Material | Solid pine |
| Cross-section | 75 × 45 mm |
| Finish | Raw planed, rounded edges |
| Available lengths | 75 cm / 150 cm / 210 cm / 260 cm |
| Trimmable | Yes – with a saw, to suit the project dimensions |
| Sold | Individually |
| Main use | Wardrobe door frame |
| Door sold with? | No – sold separately from wardrobe doors |
| Usage | Interior |
Carefully measure the height and width of the frame before cutting the battens. For a standard frame: cut 2 battens to door height (side uprights) and 1 batten to width (top rail). Pre-drill the battens before screwing to avoid splitting the solid pine. Fix the side uprights first, then the top rail. A mitre or butt joint can be made at the junctions for a neater finish. Apply a finish (paint, stain) after assembly to protect the wood and create a uniform look.
With a raw finish, the batten can be painted or stained in the desired colour. On a painted frame, a slightly damp cloth is sufficient for routine maintenance. Check the tightness of fixings annually, especially if climatic variations in the room cause the wood to move.
For a standard frame (2 uprights + 1 top rail), you need 2 lengths of 210 cm (cut to height) and 1 length of 75 cm (cut to width). For a height of 260 cm, choose the 260 cm lengths for the uprights.
Yes. This batten is designed as a complementary accessory for Woodup wardrobe doors (folding, trimmable, louvred). It can also frame door panels from other brands of comparable dimensions.
Yes. Planed raw solid pine takes paint well. Sand with 120-grit, apply a wood primer then your satin white paint. The planed finish ensures good adhesion.
Choose the 210 cm length for the side uprights. You can cut it precisely to 205 cm (or the desired net height). The 75 cm length will be sufficient for the horizontal rail of a standard opening of 61 to 71 cm.
Yes. Its 75×45 mm solid pine cross-section is suitable for any interior joinery project requiring a solid, cuttable piece of wood: support battens, light floor battens, structural reinforcements in bespoke furniture.
Louvred folding wardrobe door Folding louvred door
Dispatch within 10 days when the product is in stock *.
* Except bespoke products
Dispatched within 6-8 weeks for personalised and made-to-measure products.
Payment in 1 or 3 instalments at no extra cost. Bank transfer, cheque or PayPal
Satisfied or refunded if returned within 14 calendar days (Sundays and public holidays included) following delivery.
