Half-louvred folding wardrobe door in solid pine

Name: Half-louvred folding wardrobe door in solid pine
Brand: Levigne
SKU: PDEC
Price: 129 EUR
Availability: InStock

Half-louvred folding wardrobe door in solid pine 21 mm, height 205 cm, widths 61 cm or 71 cm, rail, pivots, knobs and screws included. Solid lower panel for visual privacy, louvred upper panel for ventilation; natural shade variable according to the grain. Hinges pre-fitted on panels, complete hardware supplied with no additional purchase required. Non-trimmable – check the available height clearance before ordering and select the width according to the opening.

Width (cm)

Reference PDEC06

€129.00 incl. tax

In stock Ships within 10 days

Quantité

Paiement :

Paiement en 2x, 3x, 4x avec

Half-Louvred Folding Wardrobe Door in Solid Pine 21 mm – Partial Ventilation

The half-louvred folding wardrobe door in solid pine 21 x 32 mm, height 205 cm, is available in 61 cm (2 x 30.5 cm) or 71 cm (2 x 35.5 cm). Solid lower panel for visual privacy, louvred upper panel for natural ventilation.

Supplied with pre-fitted hinges, top rail, pivots, knobs and complete screws for the top of the door. As solid pine is a natural material, the shade and grain vary slightly from one panel to another, including between the solid section and the louvred section: this variation is normal and does not constitute a manufacturing defect. Non-trimmable model – allow 4 to 4.5 cm of clearance above the opening for the rail. For different widths, see the trimmable panels.

Feature	Description
Material	Solid pine – section 21 × 32 mm
Thickness	21 mm
Available widths	61 cm (2 × 30.5 cm) or 71 cm (2 × 35.5 cm)
Height	205 cm excluding rail
Panel type	Half-louvred – upper part louvred, lower part solid
Hinges	Pre-fitted on the door panels
Included hardware	Top rail, top and bottom pivots, knobs, screws
Trimmable	Non-trimmable
Required clearance	4 to 4.5 cm above the opening for the rail
Use	Interior – not suitable for unventilated damp rooms

Packaging

Supplied with pre-fitted hinges, top rail, top and bottom pivots, knobs, screws
Sold as a pair (2 panels)

Key points

✓ Half-louvred: partial ventilation with better visual privacy than a fully louvred model
✓ Pre-fitted hinges: panels ready to hang, no prior assembly required
✓ Complete hardware: top door rail, pivots, knobs, screws – immediate installation
✓ Smooth movement: rail and pivot system, silent and stable
✓ Ideal for: bedrooms, dressing rooms, utility rooms, hallways

Installation advice

Allow 4 to 4.5 cm of clearance above the opening to fix the top rail. First fix the rail, then position the top and bottom pivots according to the template provided. Clip the door panels onto the pivots and check the alignment: the two panels must be parallel and meet without forcing in the centre. An assembly video is available on the Woodup website to guide installation step by step.

Maintenance and protection

Dust the louvred slats two to three times a year with a soft brush or a microfibre cloth. For the solid raw pine panel, a dry cloth is sufficient for everyday cleaning. If the door has been painted or varnished, cleaning with mild soapy water (neutral pH) is suitable. Avoid abrasive products that could scratch the finish. As solid pine is a living wood, the shade of the solid panel and that of the louvred slats may differ slightly: an opaque paint will fully unify the appearance, whereas a stain or transparent varnish will allow this natural variation to show. If the pivots creak, a light wax lubrication is sufficient to restore smooth movement.

Frequently asked questions

What is the difference between a louvred door and a half-louvred door?

The louvred door Folding louvred door is fully louvred across its entire height. The half-louvred door Folding half-louvred door has a solid upper section and a lower section with louvred slats. The half-louvred door offers greater visual privacy while maintaining good air circulation.

Can these doors be installed in a utility room?

Yes, provided the room is properly ventilated. These doors are not suitable for spaces exposed to permanent humidity without air extraction.

Why does the shade of the solid panel sometimes differ from that of the louvred slats?

Solid pine is a natural material whose shade and grain vary according to the cut and growth of each board. On a half-louvred panel, the solid section and the louvred slats may therefore show slight shade differences, which does not constitute a manufacturing defect. An opaque paint makes it possible to achieve a perfectly uniform finish.

Can the door be trimmed to fit a lower height?

No, this model cannot be trimmed. For an opening of a different height, please see the trimmable doors in the range (Trimmable natural pine door in natural pine, Trimmable white lacquered door in white lacquer).

How long does installation take?

A person with standard tools (drill, spirit level, screws) can install these doors in 30 to 60 minutes. As the hinges are pre-fitted and the hardware supplied, no complex preparation is required. The Woodup assembly video details each step.

Do these doors fit a wardrobe without an existing frame?

Yes, provided there is a flat surface at the top of the opening to fix the rail (4 to 4.5 cm clearance). For a neat finish with a visible surround, pair these doors with the Woodup pine battens Wardrobe door frame batten.

Battens for wardrobe door frame

All our wardrobe doors