Horizontal Articulated Connector for 80x30mm Aluminium Handrail - Quadrum Range
This horizontal articulated connector joins two sections of 80x30mm aluminium handrail from the Quadrum range at a variable angle. It is used at each horizontal change of direction of the guardrail - landing angle, corner return, L-shaped or U-shaped configuration. Compatible exclusively with the Quadrum handrail in 80x30mm section, it is available in gloss black and gloss stainless steel finishes to integrate seamlessly with the existing installation.
Sold individually, this connector is fixed without welding or complex cutting. It eliminates the need to cut handrail ends at a precise mitre for each angle - the articulated mechanism absorbs angular tolerances and guarantees a clean result even on non-standard angles.
Main features
| Feature | Value |
| Material | Anodised aluminium |
| Use | Horizontal variable-angle connector |
| Compatible handrail section | 80x30mm - Quadrum handrail |
| Finishes | Gloss black / Gloss stainless steel |
| Range | Quadrum only - not compatible with Ellipsis |
| Sold | Per unit |
Key features
- ✓ Variable angle - adapts to all angles without complex mitre cutting
- ✓ Compatible with Quadrum 80x30mm handrail - exact dimensions of the range
- ✓ Consistent finishes - gloss black or gloss stainless steel identical to the Quadrum kit
- ✓ Sold individually - one connector per change of direction
- ✓ Exclusive to the Quadrum range - not interchangeable with Ellipsis
Installation tips
Adjust the angle of the connector before inserting it onto the handrail ends. Measure your configuration angle precisely using a protractor or adjustable square. Tighten the articulation mechanism once the angle has been confirmed - the connector then holds the angle rigidly. This connector is used in combination with the articulated square baluster connectors Articulated connector for 16x16mm Quadrum balusters to manage the full angle across the entire height of the guardrail.
Care and protection
Clean with soapy water. Check tightness annually. Rinse with fresh water in coastal environments or where de-icing salt is present to prevent mineral deposits in the articulation mechanism.
WoodUp tip
Important before purchasing: this connector is specific to the QUADRUM 80x30mm handrail — it is not compatible with the ELLIPSIS handrail (100x30mm) or any other profile. It handles horizontal angles (changes of direction in plan) but not changes of slope (stair rise). For straight inline joints, use the corresponding straight connector. Allow one connector per horizontal change of direction. Clamping screws included.
Frequently asked questions
Is this connector compatible with the Ellipsis Ø50mm handrail?
No. This connector is designed for the Quadrum handrail with an 80x30mm section. The Ellipsis section (round Ø50mm profile) is different - the two connectors are not interchangeable. For the Ellipsis range, order the Ellipsis articulated handrail connector.
Does this connector handle both inward and outward angles?
Yes. The articulated mechanism also handles inward angles (interior, < 180°) and outward angles (exterior,> 180°) within the mechanical range of the joint. Check your exact angle before ordering if your configuration is atypical (very acute or very obtuse angles).
Can this connector be used for a 180° straight return (straight inline joint)?
No. For a straight inline joint between two sections of Quadrum handrail, use a straight connector designed for this purpose - not this articulated connector which is designed for angles. Always check whether your joint is straight or angled before ordering the correct accessory.
Does this Quadrum handrail connector withstand outdoor use?
Yes, anodised aluminium withstands outdoor exposure without additional treatment. The Quadrum range is designed for both interior and exterior use. In coastal environments exposed to salt spray, rinsing with fresh water once a year is sufficient to maintain the finish. The articulation locking screws should be checked annually when used outdoors to maintain the set angle.
Complementary products
Articulated connector for 16x16mm Quadrum square balusters - to be combined
Quadrum starter kit - complete square baluster guardrail
Quadrum extension kit - 100cm extension
Articulated MC ELLIPSIS connector - equivalent for the Ellipsis range
