BAVELLA Retro Metal Polycarbonate Anthracite Grey Door Canopy
BAVELLA retro canopy in metal and transparent polycarbonate, anthracite grey RAL 7016. Dimensions 140 x 82 x 23 cm, distinctive retro style, integrated gutter for controlled rainwater drainage, bracket spacing 90 cm, 2 robust brackets + polycarbonate panel + fixings included in the kit. Low height of 23 cm particularly suited to very limited spaces under the lintel — UV-resistant polycarbonate panel. Load-bearing wall support is mandatory before installation.
BAVELLA retro door canopy in metal and anthracite grey polycarbonate
The BAVELLA canopy is a retro-style door canopy in metal and transparent polycarbonate, colour anthracite grey RAL 7016. Dimensions 140 x 82 x 23 cm. Bracket spacing 90 cm, integrated gutter. Kit with 2 brackets, polycarbonate panel, and fixings.
Its low height of 23 cm makes it particularly suited to limited spaces under the lintel.
Key specifications
| Specification | Description |
|---|---|
| Dimensions | 140 x 82 x 23 cm |
| Structure | Corrosion-resistant metal |
| Panel | UV-resistant transparent polycarbonate |
| Colour | Anthracite grey (RAL 7016) |
| Style | Retro |
| Bracket spacing | 90 cm |
| Gutter | Integrated |
| Kit | 2 brackets + panel + gutter + fixings |
Key points
- ✓ Retro style: vintage design in anthracite grey
- ✓ 90 cm bracket spacing: precise spacing of wall fixings
- ✓ Integrated gutter: controlled drainage of rainwater
- ✓ Low height 23 cm: suitable for limited spaces under the lintel
- ✓ Complete kit: 2 brackets, panel, gutter, and fixings included
Installation advice
The bracket spacing of 90 cm must be measured precisely before drilling. The fixing wall must be load-bearing. The low height of 23 cm is suitable for situations where the space between the top of the door and the lintel is limited. Two people are recommended.
Maintenance and protection
The aluminium or metal RAL 7016 structure requires no treatment after installation. Cleaning 1 to 2 times per year with clean water and mild soap is sufficient. Avoid abrasive or solvent-based products that could scratch the coating.
The panel (polycarbonate or acrylic) should be cleaned with a soft damp cloth only — never a pressure washer directly or an abrasive sponge. Check the wall fixings annually and tighten if necessary.
Frequently asked questions
What is the difference between the BAVELLA canopy and the other anthracite grey metal canopies in the range?
WoodUp anthracite grey RAL 7016 metal canopies are distinguished by their dimensions and panel type. The BAVELLA canopy is available in 140 cm width. Compare dimensions with other models (COLOMBIER 140 cm, CASARDO 160 cm, LANCISE 197 cm) to find the one that suits your opening.
Is a load-bearing wall required to install this canopy?
Yes, the fixing wall must be load-bearing and in good condition (concrete, solid brick, or concrete block). Never fix to thermal insulation alone, plasterboard, or lightweight cladding without checking structural resistance. The supplied rawlplugs are generic — adapt them according to your wall type.
Can the polycarbonate panel yellow over time?
UV-resistant polycarbonate does not yellow under normal use. Acrylic retains its transparency with appropriate maintenance. Both materials offer lasting clarity — clean regularly with a soft cloth to prevent build-up.
Can this canopy be installed by oneself?
Yes, installation is accessible to a DIY enthusiast with a drill, suitable drill bits, and a spirit level. The kit includes the fixings. Two people are recommended. If your wall is made of an uncertain material, call in a professional for the fixings.
Is the RAL 7016 anthracite grey colour available in other shades?
The canopies in this range are available exclusively in anthracite grey RAL 7016. For other colours (white, black, brown), please refer to the aluminium polycarbonate ranges (DURBIZE, FONTMARTIN, FAVARDY) or the retro and wood ranges available on WoodUp.
No questions yet.
Dispatch within 10 days when the product is in stock *.
* Except bespoke products
Dispatched within 6-8 weeks for personalised and made-to-measure products.
Payment in 1 or 3 instalments at no extra cost. Bank transfer, cheque or PayPal
Satisfied or refunded if returned within 14 calendar days (Sundays and public holidays included) following delivery.
8 other products in the same category:
No questions yet.





