ABANTOS 26 MM
ABANTOS 26 MM
ABANTOS 26 MM
ABANTOS 26 MM
ABANTOS 26 MM
ABANTOS 26 MM
ABANTOS 26 MM
ABANTOS 26 MM
ABANTOS 26 MM
ABANTOS 26 MM
ABANTOS 26 MM
ABANTOS 26 MM

ABANTOS Metal Insulated Loft Ladder, 26 mm Hatch, Ceiling Opening from 70 x 50 cm

ABANTOS 26 loft ladder, metal ladder and frame, 10 steps, 18 frame sizes from 70 x 50 to 130 x 70 cm.

20 mm insulation, 26 mm hatch. For ceiling heights up to 290 cm, with 195 to 210 cm of floor space required, 220 to 245 cm of clearance, a maximum load of 160 kg and compliance with EN 14975.

The widest choice of frame sizes in our loft ladder range, including the smallest, 70 x 50 cm. Allow nearly 2 m of floor space when the ladder is unfolded.

Box dimension
ECMETI2612060
€851.29 incl. tax

Including €0.29 for ecotax

Made to order. 5 6 weeks

Quantité

Paiement :

Paiement en 2x, 3x, 4x avec

Close
 

ABANTOS Metal Insulated Loft Ladder, 26 mm Hatch, Ceiling Opening from 70 x 50 cm

The ABANTOS 26 is an all-metal loft ladder, including both ladder and frame. It comes in 18 frame sizes, the widest range in our selection, from 70 x 50 to 130 x 70 cm.

The 39 cm-wide ladder has 10 steps and reaches ceiling heights of up to 290 cm. The 26 mm hatch, including 20 mm of insulation, limits draughts.

Key specifications

FeatureDescription
ModelABANTOS 26
ConstructionMetal (ladder and frame)
Hatch thickness26 mm
Insulation thickness20 mm
Available frame sizes18 sizes: 70 x 50, 70 x 60, 70 x 70, 80 x 50, 80 x 60, 80 x 70, 90 x 50, 90 x 60, 90 x 70, 100 x 50, 100 x 60, 100 x 70, 110 x 60, 110 x 70, 120 x 60, 120 x 70, 130 x 60, 130 x 70 cm
Maximum ceiling height290 cm
Number of steps10
Ladder width39 cm
Floor space required195 to 210 cm depending on the frame
Clearance required220 to 245 cm depending on the frame
Height when folded47 to 58 cm depending on the frame
Maximum load160 kg
StandardEN 14975

Package contents

  • Ladder with frame and hatch

Key points

  • ✓ All-metal: ladder and frame
  • ✓ 18 frame sizes: from 70 x 50 cm up to 130 x 70 cm
  • ✓ Ceiling height: up to 290 cm
  • ✓ 20 mm insulation: 26 mm hatch
  • ✓ Floor space required: 195 to 210 cm
  • ✓ Maximum load: 160 kg, EN 14975 standard

Range comparison

Loft ladders for high ceilings: the features to consider, model by model.

ModelInsulation thicknessConstructionMaximum heightFloor space requiredLoadHandrail
EVIRES 2620 mm (26 mm hatch)Wood and metal ladder, wooden frame290 cm195 to 210 cm160 kg-
ABANTOS 2620 mm (26 mm hatch)Metal (ladder and frame)290 cm195 to 210 cm160 kg-
EVIRES 8680 mm (86 mm hatch)Wood and metal ladder, wooden frame290 cm210 cm160 kg-
AUBRAC 2620 mm (26 mm hatch)Wood310 cm172 cm160 kgIncluded
AUBRAC 4640 mm (46 mm hatch)Wood310 cm165 cm160 kgIncluded
EVIRES GH 2620 mm (26 mm hatch)Metal ladder, wooden frame310 cm205 or 220 cm160 kgIncluded
AUBRAC 33020 mm (26 mm hatch)Wood330 cm145 cm160 kgIncluded

How to choose the right loft ladder

The metal frame is suitable for spaces where wood is less appropriate, and for very small ceiling openings: 70 x 50 cm is the smallest size in our range. With 18 sizes, there is almost always a frame close to the size of the existing opening.

Allow 195 to 210 cm of floor space when unfolded and 220 to 245 cm of clearance. For a narrow room, check this measurement first.

Installation advice

Ceiling opening: prepare an opening to fit the chosen frame, allowing approximately 5 mm around the perimeter.

Fixing: secure the frame to the floor structure (joists and trimmers) with screws suited to the material, following the instructions. Check that the frame is square before fully tightening the screws: a twisted frame will prevent the hatch from closing properly.

Adjustment: unfold the ladder, measure the ceiling height and cut the bottom section so that it rests flat on the floor. Finally, fit the loft insulation around the frame to avoid thermal bridges.

Care and protection

Once a year, check that the screws are tight, inspect the joints between ladder sections and check that the hatch-opening mechanism works properly. Lubricate the mechanisms if opening becomes stiff, and dust the steps.

The hatch can be painted to match the ceiling. Take care not to block the seal between the hatch and frame, which provides the airtight barrier.

Frequently asked questions

Steel or wooden loft ladder: which should you choose?

Metal provides a rigid frame and ladder and, in this case, a wider range of sizes. Wood blends more easily into an interior. The ABANTOS is entirely metal and comes in 18 frame sizes.

What is the smallest loft ladder available?

In our range, the ABANTOS has the smallest frame option: 70 x 50 cm. Even so, it reaches ceiling heights of up to 290 cm.

How much floor space is needed to unfold the ABANTOS?

Allow 195 to 210 cm of floor space, depending on the frame, and 220 to 245 cm of clearance to open the hatch and unfold the ladder.

How do I choose the frame size for a loft ladder?

Choose the frame to fit the ceiling opening: its dimensions correspond to the opening needed, allowing approximately 5 mm around it for installation. Measure the existing opening, or the one you can create between the joists, then choose the closest frame size that does not exceed it.

Do I need to cut a loft ladder to length?

Yes, in most cases. The ladder is supplied for the maximum ceiling height and is cut at the bottom so that the final section rests flat on the floor. Measure the ceiling height, unfold the ladder and cut it according to the instructions.

View all our loft ladders

Width (cm)
39
Species/material
Metal
Number of treads
10
Standard
EN14975
Footprint (cm)
200 / 210 /195
Closed staircase height (cm)
50/ 47 / 58
maximum load (kg)
160
clearance space (cm)
220 / 225 / 230 / 245
Insulation thickness (mm)
20
Tread depth (cm)
8
Hatch thickness (mm)
26
Floor-to-ceiling height (cm)
290
ECMETI2612060
0 Item
3420610008819

No questions yet.


Your question has been successfully sent to our team. Thank you for the question!
Ask a question
hide the form

You might also like

Dispatch within 10 days

Dispatch within 10 days when the product is in stock *.
* Except bespoke products

Dispatched within 6-8 weeks

Dispatched within 6-8 weeks for personalised and made-to-measure products.

Secure payment

Payment in 1 or 3 instalments at no extra cost. Bank transfer, cheque or PayPal

Satisfied or refunded

Satisfied or refunded if returned within 14 calendar days (Sundays and public holidays included) following delivery.

8 other products in the same category:

No questions yet.


Your question has been successfully sent to our team. Thank you for the question!
Ask a question
hide the form