ESPINAS - balustrade

Name: ESPINAS - balustrade
Brand: Levigne
SKU: ELA600
Price: 329 EUR
Availability: PreOrder

ESPINAS guardrail — grey epoxy-coated metal with solid beech handrail. For indoor spiral staircases. Compatible with Baruchet, Chansert, Pelletière, Béal and Peyra. 11 metal balusters Ø18 mm. Length 1 m; compliant height 1 m. Unfinished, untreated solid beech — apply your chosen finish (oil, varnish or woodstain) before installation. Fixing screws and assembly instructions included. Check compatibility with your spiral staircase model before ordering.

Reference ELA600

€329.00 incl. tax

Including €0.42 for ecotax

Restocking in progress

Quantité

Paiement :

Paiement en 2x, 3x, 4x avec

ESPINAS guardrail in grey epoxy-coated metal with beech handrail — indoor spiral staircase

The ESPINAS guardrail combines grey epoxy-coated metal and natural beech and is designed for contemporary spiral staircases by Baruchet, Chansert and Pelle. Its structure has 11 grey epoxy-coated metal balusters, 18 mm in diameter, over a length of 1 metre, with a finished height of 1 metre. The round metal balusters give it a clean, contemporary look, complemented by the natural warmth of the solid beech handrail.

The beech handrail is supplied unfinished and untreated — apply a protective finish before use. Floor fixing screws are not included; choose them to suit the supporting surface. For indoor use only.

Key specifications

Specification	Value
Structure	Grey epoxy-coated metal
Balusters	11 grey epoxy-coated metal balusters — Ø18 mm
Handrail	Natural solid beech — unfinished and requiring treatment
Length	1 000 mm
Height	1 000 mm
Staircase compatibility	Baruchet, Chansert, Pelle
Floor fixing screws	Not included
Use	Indoor use only

Key points

✓ Compatible with Baruchet, Chansert and Pelle — attaches directly without modification
✓ 11 balusters Ø18 mm — compliant spacing of ≤ 11 cm over a 1 m length
✓ Grey epoxy-coated metal + beech — a warm, contemporary look
✓ 1 m high — complies with indoor landing regulations
✓ Unfinished handrail — choose your finish before installation

Installation advice

Check that your staircase is a Baruchet, Chansert or Pelle model before ordering. Finish the beech handrail before installation — once it is fitted to the staircase, the underside is difficult to reach. Choose floor fixings (not included) to suit your supporting surface. Follow the supplied instructions for attaching the guardrail to these spiral staircases.

Care and protection

Beech handrail: finish with floor varnish or oil before installation, then clean lightly with soapy water each year. Epoxy-coated metal structure: wipe clean with a damp cloth; avoid abrasive products. This product is designed for dry indoor settings — do not expose it to moisture.

WoodUp tip

Before you buy: this guardrail is designed for Baruchet, Chansert, Pelletière, Béal and Peyra spiral staircases — check compatibility with your exact model before ordering. The unfinished beech handrail must be treated before installation. Fixing screws are supplied. The 11 Ø18 mm balusters comply with the spacing requirements of NF P01-012. For the best result, finish the beech handrail before assembly, paying particular attention to the cut ends.

Frequently asked questions

Does this guardrail fit every Baruchet model?

The ESPINAS is designed for standard Baruchet, Chansert and Pelle spiral staircases. If your Baruchet staircase is an unusual model, with a non-standard diameter or a bespoke design, contact WoodUp to confirm compatibility before ordering.

Can I order the ESPINAS with a handrail in a wood other than beech?

This model comes with a beech handrail as standard. Contact WoodUp to check whether oak or fir alternatives are available for this specific model.

What is the best finish for a beech handrail on a spiral staircase?

For a heavily used spiral staircase, such as the only access to an upper floor, 2–3 coats of floor varnish are recommended. This forms a durable protective film that resists knocks and scratches, essential for a handrail that sees frequent use. Apply it before assembly to cover every face of the handrail, particularly the underside and edges.

Does this ESPINAS guardrail require special tools for installation?

A drill, spirit level and screwdriver are all you need. The supplied instructions specify the required drill-bit diameters according to the material of the spiral staircase treads. For steel treads on a metal spiral staircase, use an HSS metal drill bit and self-tapping screws or pop rivets, depending on the thickness of the metal.

How long will the grey epoxy-coated metal structure last indoors?

In a dry indoor setting, the grey epoxy-coated metal structure will last several decades without visible deterioration if it is not exposed to prolonged moisture. The indoor epoxy coating resists knocks and light scratches well. If it is deeply scratched, touching it up with a commercially available grey epoxy paint will prevent localised oxidation.

Is this guardrail supplied assembled or as a kit?

The ESPINAS is supplied as a kit to assemble, with instructions. Installation requires a drill, spirit level and screwdriver. Allow around an hour for the complete installation. Apply the finish to the beech handrail before assembly so you can easily cover every face — once fitted to the spiral staircase, some faces of the handrail become difficult to reach.