Your cart
There are no more items in your cart
Straight staircase SUCHET Fir
SUCHET straight staircase in solid fir — kit for a height of 280 cm. 13 steps, width 80 cm (82 cm with handrail), step height 20 cm, tread depth 16.8 cm, cross-section 200x28 mm, stairwell 229x85 cm. Supplied in 2 packages. Available with or without risers. Fixings and instructions included. Untreated raw solid fir — finish required before installation. The 16.8 cm tread depth is suited to standard ceiling heights. Interior use only. This staircase is supplied with its handrail.
SUCHET Straight Staircase - Solid Fir, 280 cm, 13 Steps
The SUCHET straight staircase in solid fir is a kit staircase for a floor-to-floor height of 280 cm with 13 steps. Its width is 80 cm excluding handrail (82 cm with handrail) with a floor footprint of 229 cm — more compact than a standard 14-step staircase. The recommended stairwell is 229x85 cm. The step height is 20 cm with a tread depth of 16.8 cm — a shorter tread depth than the Standard range, to be taken into account for climbing comfort.
The steps have a 200x28 mm cross-section with risers. The fir is supplied unfinished — a protective finish must be applied before first use. Available with or without risers and handrail. Supplied in 2 packages.
Main specifications
| Specification | Description |
|---|---|
| Type | Straight staircase, interior, kit |
| Wood species | Untreated solid fir |
| Floor-to-floor height | 280 cm (can be cut down) |
| Number of steps | 13 |
| Step height | 20 cm |
| Tread depth | 16.8 cm |
| Width | 80 cm excluding handrail / 82 cm with handrail |
| Step cross-section | 200x28 mm (with risers) |
| Floor footprint | 229 cm |
| Recommended stairwell | 229x85 cm |
| Risers | With or without, your choice |
| Handrail | Yes, reversible left or right |
| Finish | Raw fir — finish required before use |
| Use | Interior use only |
Packaging
- ✓ 2 packages: standard delivery
Key points
- ✓ Compact footprint: only 229 cm for a 280 cm height — 44 cm less than a standard 14-step staircase
- ✓ Tread depth 16.8 cm: shorter than the Standard range (19 cm) — steeper staircase, to be verified according to users
- ✓ 13 steps: 20 cm step height compliant, reduced number of steps thanks to the compact design
- ✓ Handrail can be added afterwards: reversible left or right, fixings included
- ✓ Raw fir: protective finish required before use
- ✓ 2 packages: easier handling in restricted access areas
Installation advice
Check the floor-to-floor height (280 cm maximum) and the stairwell (229x85 cm recommended) before unpacking. These measurements apply to finished floor and ceiling. The tread depth of 16.8 cm is shorter than a standard staircase (19 cm) — verify that this configuration suits regular users before ordering.
Assemble the stringers, steps, and risers following the instruction manual. Fix to the floor and upper support using fixings appropriate for the material. Two people are recommended for positioning the stringers. The handrail can be added after assembly.
Maintenance and protection
Apply a protective finish before first use. For fir, a 2-coat staircase varnish provides good protection (renewal every 5–7 years). An oil-wax is suitable for moderate use. Cleaning: slightly damp cloth, neutral pH.
WoodUp Advice
The SUCHET is a compact straight staircase: its footprint of 229 cm makes it appealing when there is not enough space for a 14-step staircase (259–273 cm). However, its tread depth of 16.8 cm is shorter than the comfortable standard (19 cm minimum recommended). Before ordering, check that this tread depth suits your users — for young children or people with reduced mobility, a larger tread depth is preferable.
Important before purchasing: the reduced tread depth means the foot extends slightly beyond the front of the step when descending. This is common on compact staircases, but it is worth being aware of — less agile users should descend facing the staircase.
Frequently asked questions
Why does the SUCHET have 13 steps instead of 14?
For a floor-to-floor height of 280 cm with 13 steps, the step height is 280/14 = 20 cm (counting the landing step). With 14 standard steps, the same result is achieved but with a wider tread depth. The SUCHET reduces its footprint by retaining 13 steps and adopting a tread depth of 16.8 cm — saving 30 cm of floor footprint compared to a 14-step staircase with a 19 cm tread depth.
Is a tread depth of 16.8 cm sufficient for everyday use?
A tread depth of 16.8 cm is functional for an agile adult who uses the staircase frequently — the foot quickly adapts to the configuration. For children under 8, elderly people, or those with reduced mobility, a tread depth of 19 cm or more is safer. Descending is the most sensitive moment — going down facing the staircase (as on a ladder) is safer with a short tread depth.
Which staircase should I choose if my available space is limited to 230 cm?
The SUCHET (229 cm footprint) is the most compact straight staircase in the WoodUp range for a 280 cm height. If even 229 cm is too much, loft staircases (AULAC, BASSEYRE) or alternating-tread staircases (NUGERE) offer an even smaller footprint, at the cost of a steeper pitch.
Can the SUCHET be cut down?
Yes. If your floor-to-floor height is less than 280 cm, the stringers can be cut down according to the chart in the instruction manual. Cutting modifies the height of the first step. For a height of 260 cm, the cut is approximately 20 cm on the stringers.
What is the difference between the SUCHET and the MORENO?
The MORENO has 15 steps for 285 cm with a tread depth of 18.3 cm and a footprint of 273 cm. The SUCHET has 13 steps for 280 cm with a tread depth of 16.8 cm and a footprint of 229 cm. The SUCHET is more compact but steeper. The MORENO is more comfortable but requires more floor space.
Should fir be treated before or after installation?
The finish should be applied after complete installation of the staircase and handrail. Hidden surfaces (undersides of steps, inner faces of stringers) may be treated before assembly for complete protection. Do not delay the finish until after first use — raw fir absorbs dirt quickly.
Our complementary staircases
MORENO - Straight fir staircase 285 cm, tread depth 18.3 cm
CHEVALARD - Straight staircase in beech or fir, tread depth 19 cm
- Width (cm)
- 82
- Species/material
- Fir
- Number of treads
- 13
- Section (mm)
- 200x28 mm
- Footprint (cm)
- 229
- Recommended stairwell opening (cm)
- 85*229
- Floor-to-floor height (cm)
- 280
- Step height (cm)
- 20
- Range
- Eco
- Tread depth (cm)
- 16.8
- Handrail included
- Yes
- Number of parcels
- 2
- Step thickness (cm)
- 28
- Staircase type
- Straight
EGE080R
5 Products
3420610007584
No questions yet.
Your question has been successfully sent to our team. Thank you for the question!
Ask a question
hide the form
You might also like
Dispatch within 10 days
Dispatch within 10 days when the product is in stock *.
* Except bespoke products
Dispatched within 6-8 weeks
Dispatched within 6-8 weeks for personalised and made-to-measure products.
Secure payment
Payment in 1 or 3 instalments at no extra cost. Bank transfer, cheque or PayPal
Satisfied or refunded
Satisfied or refunded if returned within 14 calendar days (Sundays and public holidays included) following delivery.
8 other products in the same category:
- -€56.86
- Pack
- Pack
- -€62.68
- Pack
Traditional staircase
CHEVALARD + smooth aluminium handrail
From
€1,193.90
incl. tax
€1,256.58
incl. tax
- Pack
- Pack
- Pack
- Pack
Our tips and tricks for this product
-
What angle for a straight staircase?
What is the ideal angle for a straight staircase? What angle should an interior straight staircase have?...Read more -
How to install a straight staircase?
To install a straight staircase, present it in a dry run. Draw a line on the upper wall, under the last step, then on...Read more -
Installing a wooden staircase: how to go about it?
Are you wondering how to install a wooden staircase? Kit or pre-assembled staircases, made-to-measure or standard,...Read more
No questions yet.
Your question has been successfully sent to our team. Thank you for the question!
Ask a question
hide the form
Tap to zoom
