Natural pine louvred western door

Louvred western doors in natural raw pine, 2 leaves, thickness 21 mm. Widths 68 cm (2×34 cm) for a 73 cm opening, or 78 cm (2×39 cm) for an 83 cm opening. Witch's hat height: 99 cm sides, 104 cm centre. Louvred slats for an airy separation and filtered light. Pivots not included — sold separately Swing pivots or as a kit Western pine door kit + pivots. Raw finish to be treated. Indoor use only.

Width

Reference PWN68

€99.00 VAT included

In stock Dispatched within 10 days

Quantité

Paiement :

Paiement en 2x, 3x, 4x avec

Natural Pine Louvred Western Door – 2 Leaves, 68 or 78 cm, Without Pivots

These louvred western doors in natural pine are sold in sets of 2 leaves, thickness 21 mm. Available in width 68 cm (2 leaves of 34 cm) or 78 cm (2 leaves of 39 cm). The height follows the witch's hat profile: 99 cm on the sides, 104 cm in the centre. The louvred slats allow an airy separation of spaces while letting light and air circulate.

The pivot kit is not included — it is sold separately Swing pivots. For a complete kit with pivots, see the Western pine door kit + pivots. The recommended wall opening is 73 cm for the 68 cm leaves and 83 cm for the 78 cm leaves. The finish is natural raw pine, customisable with paint, varnish or wood stain. These doors are intended for indoor use only.

Main characteristics

Characteristic	Description
Material	Solid natural pine
Thickness	21 mm
Available widths	68 cm (2 × 34 cm) or 78 cm (2 × 39 cm)
Height	Witch's hat profile: 99 cm sides / 104 cm centre
Recommended opening	73 cm for 68 cm / 83 cm for 78 cm
Panel type	Louvred – natural ventilation, filtered light
Finish	Natural raw pine – to be treated according to use
Pivots	Not included – to be ordered separately Swing pivots
Use	Indoor use only

Packaging

Sold in sets of 2 leaves
Pivots not included — to be ordered separately Swing pivots or as a complete kit Western pine door kit + pivots

Key points

✓ Solid natural pine: durable material, visible grain, customisable finish
✓ Louvred panel: space divider with air circulation and light
✓ Two widths: 68 or 78 cm suited to standard openings
✓ Witch's hat profile: authentic western silhouette
✓ Raw finish: paintable, varnishable or wood stain depending on décor

Installation tips

Measure the wall opening before ordering: allow 73 cm for 68 cm leaves and 83 cm for 78 cm leaves. This 5 cm clearance is essential for pivoting. Order the pivot kit Swing pivots separately. Fix the bottom pivot to the floor by pre-drilling, then the top pivot to the lintel in vertical alignment. Apply a finish (varnish or wood stain) to the raw pine before installation to protect the wood, particularly if the doors are exposed to a humid atmosphere.

Maintenance and protection

Untreated raw pine can be left natural for an authentic finish. To preserve the appearance, apply a clear wood stain or wood oil every 2 to 3 years. Dust the louvred slats with a soft brush two to three times a year. In the event of a surface scratch, light sanding with 120-grit sandpaper followed by a touch-up finish restores the original appearance. Lubricate the pivots once a year with a few drops of light oil.

Frequently asked questions

Are the pivots included with these doors?

No. The swing pivots are sold separately Swing pivots. If you prefer a complete kit with doors and pivots included, see the product Western pine door kit + pivots.

What is the exact height of these western doors?

The height follows the witch's hat profile: 99 cm on the sides and 104 cm in the centre. This rounded shape is characteristic of the saloon style.

Can these doors be painted in colour?

Yes. Raw pine accepts paint well after light sanding with 120-grit sandpaper and a wood primer. For the louvred slats, use a fine brush to reach the gaps and avoid runs.

Are these doors suitable as a kitchen-living room divider?

Yes, that is a typical use. The louvred panel allows light and air to pass through while creating a partial visual separation. In a kitchen, clean the slats regularly to prevent grease build-up between the louvres.

What is the difference between the Natural pine western door (natural) and the White lacquered western door (white lacquered) doors?

Both models have the same format and mechanism. The difference lies in the finish: Natural pine western door is in natural raw pine to be treated yourself, White lacquered western door is in white satin-lacquered MDF ready to install. The Natural pine western door offers more freedom of customisation; the White lacquered western door is immediately usable without any treatment.

Swing pivot kit for western doors

Natural pine western door kit + pivots Western pine door kit + pivots