White Lacquered Louvred Western Door in Pine

White lacquered louvred western doors, 2 panels in pine and lacquered MDF, thickness 21 mm. Widths 68 cm (2×34 cm) for 73 cm opening, or 78 cm (2×39 cm) for 83 cm opening. Arched profile height: 99 cm sides, 104 cm centre. Satin white lacquered finish ready to install. Swing pivots not included — sold separately Swing pivots or as a complete kit White western door kit + pivots. Interior use only.

Width

Reference PWL68

€109.00 VAT included

In stock Dispatched within 10 days

Quantité

Paiement :

Paiement en 2x, 3x, 4x avec

White Lacquered Louvred Western Door – 2 Pine and MDF Panels, 68 or 78 cm

These white lacquered louvred western doors are sold as a set of 2 panels, made with a solid pine frame and white lacquered MDF slats, thickness 21 mm. They are available in two widths: 68 cm (2 panels of 34 cm) or 78 cm (2 panels of 39 cm). The recommended wall opening is 73 cm for 68 cm panels and 83 cm for 78 cm panels — this 5 cm clearance is required for pivoting.

The metal pivot kit is not included — it is sold separately Swing pivots. For a ready-to-install solution with pivots included, see the kit White western door kit + pivots. The white lacquered finish is satin, ready to use without any treatment. These doors are intended for interior use only.

Key features

Feature	Description
Material	Solid pine frame + white lacquered MDF slats
Thickness	21 mm
Available widths	68 cm (2 × 34 cm) or 78 cm (2 × 39 cm)
Recommended opening	73 cm for 68 cm / 83 cm for 78 cm
Finish	Satin white lacquer – ready to install
Panel type	Louvred – ventilation and privacy
Pivots	Not included – to be ordered separately Swing pivots
Use	Interior use only

Packaging

Sold as a set of 2 panels
Swing pivots not included — to be ordered separately Swing pivots or as a complete kit White western door kit + pivots

Key points

✓ White lacquered finish: ready to install, no prior treatment required
✓ Louvred panel: built-in natural ventilation, diffused light
✓ Two widths: 68 or 78 cm to fit standard openings
✓ Solid pine + MDF: stable structure, neat finish
✓ Compatible with pivot kit: Swing pivots (separately) or White western door kit + pivots (complete kit)

Installation advice

Measure the wall opening before ordering: allow 73 cm for 68 cm panels and 83 cm for 78 cm panels. This 5 cm clearance is essential for pivoting. Order the pivot kit Swing pivots separately if not included. First install the bottom pivot in the floor (pre-drill), then the top pivot in the lintel, in perfect vertical alignment. Fit the panels and check the smoothness of movement. On the white lacquered finish, protect the surfaces during handling to avoid scratches.

Care and protection

Clean the white lacquered surface with a slightly damp cloth. Avoid abrasive products and acidic household sprays that dull lacquered MDF. For the louvred slats, a soft brush or microfibre cloth will remove dust from between the slats two to three times a year. Lubricate the pivots once or twice a year with a few drops of light oil to keep the movement smooth.

Frequently asked questions

Are the pivots included in the delivery?

No. The swing pivots are sold separately Swing pivots. If you would like a complete kit (panels + pivots included), see the product White western door kit + pivots.

What wall opening is needed for 68 cm panels?

Allow a wall-to-wall opening of at least 73 cm. The 5 cm clearance between the panels and the opening is necessary to allow pivoting without the doors touching the walls.

Can these doors be installed in a kitchen?

Yes. The satin white lacquer holds up well against light splashes. For a kitchen exposed to frequent grease, clean the louvred slats regularly with mild soapy water. Avoid direct steam on MDF panels.

What is the height of these western doors?

The height is 99 cm on the sides and 104 cm in the centre, following the characteristic arched profile of the western style. This height corresponds to saloon-type partition doors.

Can these doors be repainted in another colour?

Yes. Lacquered MDF accepts a new coat of paint after light sanding with 220-grit paper. Use a satin lacquer paint suitable for wood and MDF for a uniform result.

Swing pivot kit for western doors

White lacquered western door kit + pivots White western door kit + pivots