Rustic western door in natural pine
Solid-panel western doors in natural pine 30 mm, sold in a set of 2 panels. Chapeau de gendarme profile: 105 cm on the sides, 115 cm at the centre. Widths 68 cm (recommended opening 73 cm) or 78 cm (opening 83 cm). Sold without pivots or hinges — to be paired with the pivot kit Double-action swing pivots or double-action hinges Double-action hinge H75. Raw natural pine finish. Interior use only.
Rustic Western Door in Natural Pine – 30 mm Solid Panels, Chapeau de Gendarme
These solid-panel western doors in natural pine are sold in a set of 2 panels. Their chapeau de gendarme profile — 105 cm on the sides, 115 cm at the centre — is characteristic of traditional saloon doors. Each panel is 30 mm thick and is available in two widths: 68 cm (2 x 34 cm) or 78 cm (2 x 39 cm). These doors are delivered without pivots or hinges — the opening system is to be planned separately according to your use.
The recommended wall opening is 73 cm for 68 cm panels and 83 cm for 78 cm panels. This 5 cm clearance is essential to allow smooth pivoting, particularly if you are fitting double-action swing pivots. The finish is in raw natural pine, ready to paint, varnish or leave as is for an authentic look.
Main characteristics
| Characteristic | Description |
|---|---|
| Material | Solid natural pine |
| Thickness | 30 mm |
| Panel type | Solid – solid appearance, no louvres |
| Profile | Chapeau de gendarme: 105 cm on the sides / 115 cm at the centre |
| Available widths | 68 cm (2 x 34 cm) or 78 cm (2 x 39 cm) |
| Recommended wall opening | 73 cm for 68 cm panels / 83 cm for 78 cm panels |
| Finish | Raw natural pine – to be treated according to use |
| Delivery | By set of 2 panels — without pivots or hinges |
| Use | Interior use only |
Packaging
- Sold in a set of 2 panels
- Pivots and hinges not included — to be ordered separately (Double-action swing pivots or Double-action hinge H75)
Key points
- ✓ 30 mm solid panels: solid and opaque appearance, complete visual privacy
- ✓ Chapeau de gendarme profile: authentic western silhouette, traditional saloon style
- ✓ Two widths: 68 or 78 cm to suit standard openings
- ✓ Raw natural pine: to be painted, varnished or left natural to suit your décor
- ✓ Without pivots: freedom to choose the opening system (double-action swing pivots or hinges)
Installation advice
Measure the wall opening before ordering. Allow 5 cm of clearance between the panel width and the opening to ensure smooth pivoting (73 cm for 68 cm panels, 83 cm for 78 cm panels). Do not confuse panel width with passage width: these are two distinct measurements.
Select your opening system separately: double-action swing pivots Double-action swing pivots allow opening in both directions with automatic return; double-action hinges Double-action hinge H75 offer the same function with side fixing. Fix the pivots or hinges at the top and bottom of each panel, always pre-drilling the wood to avoid splitting the pine. Two fixing points per panel are sufficient for this height.
Maintenance and protection
In a natural raw finish, the pine can be left as is for an authentic look, or treated with a varnish, stain or paint. Without treatment, natural wood gradually changes shade with light. For minimal maintenance, wipe with a lightly oiled cloth once or twice a year. In the event of a surface scratch, a light sanding with 120-grit sandpaper followed by a coat of finish restores the original appearance. As these doors are intended for interior use, no water-repellent treatment is necessary.
Frequently asked questions
What wall opening should be planned for 78 cm panels?
Allow a wall-to-wall opening of 83 cm minimum. This 5 cm clearance between the panels (78 cm) and the opening is essential for pivoting. Without this clearance, the panels will scrape the walls when opening.
Are these doors sold with the pivots?
No. These rustic western doors are delivered without pivots or hinges. The double-action swing pivots Double-action swing pivots and double-action hinges H75 Double-action hinge H75 are available separately in the Woodup range.
What is the difference between the rustic western door and the natural louvred door Natural pine western door?
The rustic door Rustic western door has solid panels: it provides complete visual privacy. The natural louvred door Natural pine western door is open-slatted, allowing air circulation and letting light through. The choice depends on the level of privacy desired.
Can these doors be painted white or in colour?
Yes. Raw pine accepts paint, stain or varnish well. A light sanding with 120-grit sandpaper before application improves adhesion. Use a wood primer before painting for a uniform result, particularly over pine knots which can show through.
How many pivots are needed per set of 2 panels?
The double-action swing pivot kit is designed to fit a pair of panels. One kit is sufficient for this set of 2 rustic western doors. If you choose the double-action hinges Double-action hinge H75, allow for 4 hinges in total (2 per panel).
Double-action swing pivots for western doors
No customer questions for the moment.
Dispatch within 10 days when the product is in stock *.
* Except bespoke products
Dispatched within 6-8 weeks for personalised and made-to-measure products.
Payment in 1 or 3 instalments at no extra cost. Bank transfer, cheque or PayPal
Satisfied or refunded if returned within 14 calendar days (Sundays and public holidays included) following delivery.
7 other products in the same category:
No customer questions for the moment.





