Black metal handrail for indoor staircase

Name: Black metal handrail for indoor staircase
Brand: Levigne
SKU: ROMN200
Price: 79.86 EUR
Availability: InStock

Black metal handrail for indoor staircase or corridor. Available in 2 m, 2.50 m and 3 m, non pre-drilled tube for free positioning of brackets. Supplied with 2 black plastic end caps. Wall brackets not supplied — to be chosen according to the wall type. Contemporary black finish compatible with dark joinery and modern interiors. Can be cut to length with a hacksaw as required. Indoor use only.

Length (cm)

Reference ROMN200

€79.86 incl. tax

Including €0.11 for ecotax

In stock Dispatched within 5 days

Quantité

Paiement :

Paiement en 2x, 3x, 4x avec

Black metal handrail for indoor staircase

The black metal handrail is designed to be fitted to an indoor staircase, landing, or corridor requiring a stable support zone. Available in 2 m, 2.50 m and 3 m, it is not pre-drilled to allow precise positioning of brackets according to the wall configuration. Supplied with 2 black plastic end caps. Wall brackets must be ordered separately.

Indoor use only. Can be cut to the exact required length.

Main characteristics

Characteristic	Description
Material	Black powder-coated metal tube
Available lengths	2 m, 2.50 m or 3 m
Finish	Black paint - indoor use
Drilling	Not pre-drilled
Accessories supplied	2 black plastic end caps
Brackets / screws	Not supplied
Usage	Indoor: staircase, landing, corridor

Key points

✓ 3 available lengths: 2 m, 2.50 m or 3 m
✓ Not pre-drilled: free positioning of brackets
✓ 2 end caps included: neat finish at each end
✓ Black finish: compatible with dark joinery and contemporary interiors
✓ Cuttable: to the exact length with a hacksaw

Installation tips

Choose brackets compatible with your metal handrail and suited to the wall material. Space them 80 to 100 cm apart maximum and place one within 30 cm of each end. Recommended height: 90 cm minimum from the nosing. The handrail is not pre-drilled: mark the drilling positions according to the actual position of the brackets.

Maintenance and protection

The painted finish (white, grey, black) withstands normal indoor use. An annual wipe-down with clean water and a soft cloth is sufficient. Avoid abrasive products. In the event of a scratch, a touch-up with a compatible metal paint applied by brush is possible.

Frequently asked questions

Are the brackets supplied with the black metal handrail?

No, the wall brackets are not supplied. Choose brackets suited to the diameter and your wall type (concrete, brick, plaster). See our compatible accessories for 40 mm diam.

How do I fix the black metal handrail to the wall?

Position the brackets at regular intervals (80–100 cm max), checking they are level. Drill and plug according to the wall material. Fix the brackets, then slide the handrail into place and tighten. The handrail is not pre-drilled: drill at the chosen locations according to the actual position of your brackets.

Is the black metal handrail compatible with WoodUp stairs?

Yes, this handrail is compatible with WoodUp stairs and any other installation requiring continuous support. It also fits corridors, landings, and existing balustrades. Check the available length (200, 250, or 300 cm) against your configuration.

What is the difference between a black handrail and a wooden handrail?

The black metal handrail requires no maintenance, is resistant to moisture, and has a clean contemporary appearance. The wooden handrail (beech, oak, fir) adds a natural and warm touch but requires finishing and regular maintenance. Metal is recommended for areas exposed to moisture or modern environments.

Can the black metal handrail be cut to the required length?

Yes, the handrail can be cut with a hacksaw or a circular saw fitted with a metal-cutting blade. Deburr the ends carefully after cutting and replace or adapt the end caps if necessary.

View the full grey metal handrail range