Turned solid wood baluster for balustrade

Solid wood turned baluster for a balustrade

Name: Solid wood turned baluster for a balustrade
Brand: Levigne
SKU: BTS095V
Price: 9.4 EUR
Availability: InStock

Solid wood turned baluster, H 95 cm - 42x42 mm section, classic turned profile with raised sections and grooves. Fir, pine or beech. Unfinished and untreated, ready to paint, varnish or stain. Sold individually. Maximum 11 cm gap between balusters (standard NF P01-012). Compatible with 18x15 mm grooved bottom rails and WoodUp posts. Calculate the quantity: length ÷ 152 mm = number of balusters. Also called a turned stair spindle. Indoor use only.

Wood species

Reference BTS095V

€9.40 incl. tax

In stock Ships within 10 days

Quantité

Paiement :

Paiement en 2x, 3x, 4x avec

Solid Wood Turned Baluster H 95 cm, 42x42 mm Section - Classic Style for Indoor Balustrades

This solid wood turned baluster measures 95 cm high with a 42x42 mm section. Its lathe-turned profile, with the raised sections and grooves characteristic of a classic traditional style, provides the vertical infill for a refined, decorative balustrade. Pair it with turned posts Solid wood turned post, wall-mounted turned half-posts Solid wood turned half-post, bottom rails Solid wood bottom rail and moulded handrails Solid wood moulded handrail to create a complete traditional balustrade. A guardrail is also called a balustrade.

Available in fir, pine or beech, it is supplied unfinished and untreated so you can choose your own finish: paint, wood stain, oil or varnish. The gap between balusters must not exceed 11 cm under standard NF P01-012. Sold individually, it lets you fit the infill to the exact length of your balustrade. For indoor use only.

Main specifications

Specification	Value
Available wood species	Fir / Pine / Beech
Height	950 mm
Section	42x42 mm (square section of the turned part)
Profile	Turned - classic traditional style
Maximum spacing	11 cm between balusters (standard NF P01-012)
Finish	Unfinished and untreated
Use	Indoor use only
Sold	Individually

Key points

✓ Classic turned profile - raised sections and grooves characteristic of traditional style
✓ 42x42 mm section - fits into the grooves of WoodUp bottom rails (15 mm deep)
✓ Spacing ≤ 11 cm - meets the standard for landing balustrades in a standard configuration
✓ 3 wood species - golden fir, light pine and fine-grained pinkish-white beech
✓ Sold individually - for a made-to-measure infill
✓ Indoor use only

Installation advice

Calculating the number of balusters: For a 1 metre span with 11 cm gaps between 42 mm balusters: 1000 ÷ (42 + 110) = 6.5 → 6 balusters. Check the actual spacing: (1000 - 6x42) ÷ 7 gaps = 106 mm - compliant with the ≤ 11 cm limit.

Installation: Insert the balusters into the groove in the bottom rail (minimum depth 15 mm). Space them evenly before fixing the handrail. For balustrades without a groove, fix them discreetly with screws through the bottom rail and handrail. Apply the finish before installation to cover the recessed areas of the turned profile easily.

Finishing the turned profile: The recessed areas need particular attention. A fine brush lets you cover the grooves without leaving marks. Two coats of hardwax oil or floor varnish, applied with a brush before installation, provide even protection across all surfaces.

Care and protection

Turned profiles collect dust in their grooves. Cleaning them annually with soapy water and a soft brush is enough to keep them clean. Floor varnish offers the best resistance to knocks and scratches on a busy staircase. Hardwax oil is easy to reapply but needs more maintenance. Avoid strong household detergents, which could dull the finish.

WoodUp advice

Before you buy: the turned baluster is the visual centrepiece of a classic balustrade, its profile catching the light differently from each viewing angle. For an even look, order all the balusters in the same wood species and, if possible, from the same batch, as natural shades vary between supplies. A maximum gap of 11 cm between balusters is mandatory under NF P01-012. Apply the finish before fitting the balusters to protect the grooves of the turned profile, which a brush cannot reach once they are in place.

Frequently asked questions

How many turned balusters are needed for 2 metres of balustrade with 11 cm spacing?

For 2 metres with 42 mm balusters at 11 cm spacing: 2000 ÷ (42 + 110) = 13.1 → rounded to 13 balusters. Check: (2000 - 13x42) ÷ 14 gaps = 104 mm - compliant with the ≤ 11 cm limit. Always order 1 or 2 extra to allow for any offcuts.

Is the turned baluster compatible with WoodUp grooved bottom rails?

Yes. The 42 mm section of the turned balusters fits into the 18x15 mm grooves of the bottom rails Solid wood bottom rail. The 18 mm-wide groove allows the baluster to be inserted easily, with a little play for centring. For a secure fit, apply a bead of wood glue in the groove before final insertion.

Can turned balusters and straight spindles be mixed in the same balustrade?

Stylistically, the mix creates a contrast between the shaped profile and straight lines. The unexpected result can be an intentional design choice. Technically, both fit into the same grooved bottom rails. Just check that the gap between each element, whether turned or straight, remains ≤ 11 cm.

Can turned beech be given a gloss varnish finish for a period-style staircase?

Yes. Fine-grained beech takes gloss varnish or gloss lacquer very well for a classic interior style. Apply at least 3 coats, sanding lightly between coats with 400-grit abrasive paper. Beech produces a particularly even, rich result: its close grain, without visible knots, suits gloss finishes well.

Can the turned baluster be used outdoors on a covered terrace?

No. This baluster is for indoor use only, whichever wood you choose (fir, pine or beech). For an outdoor balustrade, consider the WoodUp aluminium range, designed for both indoor and outdoor use.