Moulded handrail for wooden balustrades

Name: Moulded handrail for wooden balustrades
Brand: Levigne
SKU: RBSO200V
Price: 49 EUR
Availability: InStock

Solid wood moulded handrail - 50x50mm section, rounded moulded profile. Pine, fir, beech or douglas. Unfinished raw wood, ready to paint, varnish or oil. Compatible with 60x60mm and 70x70mm posts in the WoodUp range: slots into the top notch and fixed by screwing. Sold individually, available lengths vary by species. Beech, fir and pine: indoor use only. Douglas: sheltered outdoor use possible (covered terrace). Screws and brackets not included.

Wood species

Length (cm)

Reference RBSO200V

€49.00 incl. tax

Including €0.06 for ecotax

In stock Ships within 10 days

Quantité

Paiement :

Paiement en 2x, 3x, 4x avec

Solid Wood Moulded Handrail – 50x50mm Section, 4 Wood Species for Balustrades

This solid wood moulded handrail forms the part you hold on a wooden balustrade. Available in pine, fir, beech or Douglas fir, its 50x50mm section and rounded profile provide a comfortable grip and a neat appearance. It fits all 60x60mm and 70x70mm posts in the WoodUp range and can be installed on existing posts or as part of a completely bespoke layout. A balustrade is also called a guardrail.

Supplied unfinished and untreated, it can be given the finish of your choice: a hard-wearing wood varnish for impact resistance, hardwax oil for a natural look, or a tinted wood stain to complement your décor. The wood species determines where it can be used: beech and fir indoors, Douglas fir in sheltered outdoor locations.

Key specifications

Specification	Value
Available wood species	Pine / Fir / Beech / Douglas fir
Section	50x50mm – rounded moulded profile
Finish	Unfinished and untreated
Post compatibility	60x60mm and 70x70mm posts from the WoodUp range
Use of beech / fir / pine	Indoors
Use of Douglas fir	Indoors and in sheltered outdoor locations
Sold	Individually

Key points

? Rounded moulded profile – comfortable to grip and meets ergonomic handrail requirements
? 50x50mm section – compatible with 60x60mm and 70x70mm posts from the WoodUp range
? 4 wood species – fir, pine and beech for indoor use; Douglas fir can be used outdoors in sheltered locations
? Sold individually – for a custom layout or to replace a section
? Unfinished and untreated – choose a finish to suit its use and your décor

Installation tips

Fix the handrail to the tops of the posts with screws or dowels. Use concealed metal brackets or countersunk screws for a neat finish. For long spans (> 1.5m), add an intermediate post to prevent the handrail from bending when leaned on. Apply the finish before fixing so you can easily cover the underside.

For a neat joint between two handrail sections, cut the ends at 45° to form a mitre joint and bond them with wood glue before screwing. Once varnished or painted, the joint is almost invisible.

Care and protection

The handrail is the part most frequently touched: always apply a protective finish before use. Staircase varnish (2–3 coats) provides maximum resistance to knocks and wear from hands. Hardwax oil suits less frequently used areas and is easy to renew. Clean with soapy water. Outdoors (Douglas fir only), renew the treatment every 2 to 3 years.

WoodUp tip

Before you buy: this moulded handrail is the part of the balustrade you hold. It must be securely fixed to the posts, not simply rested on them. Allow for a screw fixing from underneath at intervals of no more than 80cm. The 50x50mm moulded profile with a 21x5mm groove is compatible with grooved wall brackets in the WoodUp range (IDs 164, 167). In Douglas fir, this profile can be used in sheltered outdoor locations with a suitable finish. The other wood species are for indoor use only.

Frequently asked questions

Is this handrail compatible with WoodUp turned posts?

Yes. The 50x50mm moulded handrail can be screwed to the tops of 70x70mm solid wood turned posts. The turned shape does not prevent you from fixing the handrail: use countersunk screws or a metal bracket to secure it to the top of the post.

What length of handrail should I order for a 2m balustrade?

Order a handrail as long as the span you need to cover, plus a few centimetres for trimming. If your span is 200cm and the handrail rests on top of the posts rather than fitting between them, the total handrail length is the span plus half the thickness of each post. In practice: 200cm + 7cm = approximately 207cm.

Can this Douglas fir handrail be used outdoors without shelter?

Douglas fir naturally withstands exposed outdoor conditions better than fir or pine, but a handrail is not designed for direct exposure to the elements without treatment. For exposed outdoor use, apply an exterior wood saturating oil before installation and reapply every 1 to 2 years. In the long term, an aluminium or stainless steel handrail is better suited to permanent exposure.

How do I make a neat joint between two handrail sections?

For the neatest result, cut both sections at 45° with a mitre saw. Apply wood glue to the cut faces, clamp them together and leave to dry for 24 hours. Lightly sand the joint before finishing: once varnished, it is almost invisible. For a joint under less strain that is not load-bearing, a straight 90° cut with a wooden cover strip is a simpler alternative.

How do I fix the moulded handrail to WoodUp posts?

The 50x50mm handrail fits into the top notches of 60x60mm and 70x70mm posts in the WoodUp range. Depending on the layout, fix it with a screw driven up through the post from underneath, so it remains hidden, or with concealed brackets. At corners, cut the handrail at 45° and join the sections with a glued internal reinforcing batten. Always drill pilot holes to prevent splitting, particularly with beech.