ELLIPSIS ARTICULATED CONNECTOR SHINY STAINLESS OR SHINY BLACK

Articulated handrail connector for Ellipsis range

Articulated handrail connector for the ELLIPSIS range

€82.68

In stock Dispatched within 10 days

Metal colour

x 5

Articulated connector for alu rails diam 16

€35.40

In stock Dispatched within 10 days

Metal colour

€118.08 incl. tax

In stock Dispatched within 10 days

Quantité

Pack contents

Articulated handrail connector for the ELLIPSIS range
Articulated connector for alu rails diam 16

Articulated joiner for aluminium handrail - Ellipsis range. Anodised aluminium. Variable angle connection between two sections of Ellipsis Ø50mm handrail for landing angles or changes of direction. Angle adjustable and locked by screw. Finishes: gloss black or gloss stainless steel. Compatible only with the Ellipsis Ø50mm handrail - not compatible with the Quadrum 80x30mm handrail. Maintenance: check tightness annually. Indoor and outdoor use. Sold individually.

Ellipsis Range Articulated Handrail Connector - Variable Angle Aluminium Junction

This articulated joint connects two sections of Ellipsis handrail at a variable angle, for configurations where the balustrade changes direction — landing angle, mezzanine return, L-shaped staircase. It is designed specifically for the rounded-profile handrail of the WoodUp Ellipsis range (Ø50mm cross-section) and is not compatible with the Quadrum range. Available in gloss black and gloss stainless steel finishes, it ensures the visual continuity of the installation.

Sold individually, it is used at each handrail direction change. For right angles (90°) or non-standard variable angles, this articulated joint is the simplest solution — it avoids having to mitre-cut the ends and weld or glue the junctions.

Main features

Feature	Value
Material	Anodised aluminium
Use	Variable angle joint - Ellipsis handrail
Handrail compatibility	Ellipsis handrail Ø50mm
Finishes	Gloss black / Gloss stainless steel
Range	Ellipsis only - not compatible with Quadrum
Sold	Sold individually

Key points

✓ Variable angle - adapts to all direction changes without mitre cutting
✓ Compatible with Ellipsis Ø50mm handrail - clips on without modification
✓ Consistent finishes - gloss black or gloss stainless steel identical to the rest of the range
✓ Sold individually - order as many as there are direction changes required
✓ Exclusive to the Ellipsis range - not interchangeable with the Quadrum range

Installation tips

Position the articulated joint at the desired angle between the two handrail sections. Set the angle before tightening the locking mechanism — once tightened, the joint holds the angle permanently. Then insert the ends of the handrail sections into the joint's sockets and fix according to the manufacturer's instructions. This joint works in tandem with the round rail articulated joints Ellipsis Ø16mm articulated rail joint to ensure a consistent angle across the full height of the balustrade.

Maintenance and protection

Clean with soapy water. Check the tightness of the locking mechanism annually — a poorly tightened articulated joint can create play in the handrail under load. Outdoors, rinsing with fresh water after salt exposure (seaside, de-icing) prevents mineral deposits on the articulation mechanism.

WoodUp tip

What to know before buying: this articulated joint is exclusively for the ELLIPSIS range handrail (100x30mm rounded profile cross-section) — it is not compatible with the QUADRUM handrail (80x30mm). It allows a variable angle between two sections, but does not replace a straight connector (ID 809) for in-line junctions. Allow one joint per direction change. The clamping fixings are included.

Frequently asked questions

Is this articulated joint compatible with the WoodUp Quadrum range?

No. This joint is designed for the Ellipsis handrail with a rounded Ø50mm profile. The Quadrum range uses a handrail with an 80x30mm cross-section — the connectors are different. For the Quadrum range, order the articulated horizontal connector for the 80x30mm handrail: Quadrum 80x30mm articulated handrail connector.

How many articulated joints should be ordered for a U-shaped balustrade?

A U-shaped balustrade (three sides) requires 2 articulated handrail joints (one for each 90° angle) and 2 sets of articulated rail joints Ellipsis Ø16mm articulated rail joint — one set of 5 joints per angle, making 10 rail joints in total. The fixings are included with these accessories.

Can the articulated joint handle angles of less than 90° (rake staircase balustrade)?

This joint is designed for horizontal direction changes on landings and mezzanines. For a staircase rake balustrade, the incline requires different specific accessories. Consult WoodUp before ordering to confirm compatibility with your staircase configuration.

Should the articulated handrail joint be ordered at the same time as the rail joints?

Yes, always. A direction change on an Ellipsis balustrade means managing the angle on the 5 rails AND on the handrail simultaneously. Always order both accessories together for each angle in your configuration.

Is this Ellipsis articulated joint suitable for outdoor use?

Yes, anodised aluminium resists outdoor exposure without treatment. The Ellipsis range is designed for both indoor and outdoor use. Outdoors, check the tightness of the articulation locking screw once a year to maintain the set angle. In coastal environments, rinsing with fresh water after periods of intense exposure is sufficient to maintain the finish.

Complementary products

Articulated joint for Ellipsis Ø16mm round rails - to be used in combination

Ellipsis starter kit - complete round rail balustrade

Ellipsis extension kit - 100cm extension

Horizontal aluminium handrail connector 80x30mm - Quadrum range equivalent

Data sheet

Species/material: Alu
Range: Ellipsis

Articulated fitting for round rails Ø16mm – Ellipsis range. Anodised aluminium. Variable-angle connection between two round rails Ø16mm for corner passages or staircases. Adjustable angle locked by screw. Finishes: gloss black or gloss stainless steel. Compatible only with Ø16mm rails from the WoodUp Ellipsis range – not compatible with the Quadrum range. Maintenance: check the tightness of the locking screw once a year outdoors. Indoor and outdoor use. Sold individually.

Articulated Fitting for Ø16mm Aluminium Rails Ellipsis Range – Variable Angle

This articulated fitting connects two Ø16mm Ellipsis range round rails at a variable angle, for configurations where the balustrade changes direction. It is used at each angle of the balustrade, in combination with the Ellipsis articulated handrail fitting. Each balustrade angle requires 5 rail fittings (one per rail) and 1 handrail fitting. Available in gloss black and gloss stainless steel.

Main characteristics

Characteristic	Value
Material	Anodised aluminium
Compatible rail diameter	Ø16mm – Ellipsis range
Use	Variable-angle fitting between two rails
Finishes	Gloss black / Gloss stainless steel
Range	Ellipsis only – not compatible with Quadrum
Sold	Sold individually
Quantity per angle	5 fittings per change of direction (1 per rail)

Key points

✓ Variable angle – adapts without complex cutting of the rails
✓ Ø16mm Ellipsis compatible – exact dimensions of WoodUp round rails
✓ 5 fittings per angle – one per horizontal rail of the balustrade
✓ To be combined with Ellipsis articulated handrail fitting – Ellipsis handrail fitting for the complete angle
✓ Consistent finishes – gloss black or gloss stainless steel

Installation advice

Order this fitting in batches of 5 units per angle – one fitting per rail. Adjust the angle of each fitting before inserting onto the rails. Ensure all fittings are set to the same angle before tightening to guarantee rail alignment. Use the articulated handrail fitting simultaneously to handle the handrail joint at the same angle.

Maintenance and protection

The anodised aluminium of the articulated fittings requires no surface treatment. Anodisation integrates the protection directly into the metal: no paint, no varnish, no risk of flaking.

Cleaning with clean water and a soft cloth maintains the finish over time. The articulated parts do not require lubrication under normal indoor use conditions. Outdoors, visually check the tightness of the locking screws once a year to maintain the set angle.

Avoid abrasive products and strong solvents on anodised surfaces. In coastal environments exposed to salt spray, rinsing with fresh water after periods of heavy exposure extends the life of the finish.

WoodUp tip

What to know before buying: this articulated fitting is reserved for Ø16mm round rails in the ELLIPSIS range — do not use with 16x16mm square rails in the QUADRUM range (ID 808). It handles angular changes of direction; for straight-line joints, use the straight connector (ID 782). Plan for one articulated fitting per rail and per change of direction in your configuration. The clamping screws are included.

Frequently asked questions

How many articulated rail fittings are needed for a U-shaped balustrade (3 sides)?

A U-shaped balustrade has 2 angles – therefore 10 articulated rail fittings (5 per angle) and 2 articulated handrail fittings Ellipsis articulated handrail fitting are needed. Order in one go to guarantee consistency of finish across all fittings.

Is this fitting compatible with 16x16mm square rails in the Quadrum range?

No. This fitting is designed for Ø16mm round rails in the Ellipsis range. The 16x16mm square rails in the Quadrum range require the specific Quadrum articulated fittings 16x16mm Quadrum articulated rail fitting.

Can this fitting handle a 45° angle (diagonal)?

The angular travel of the articulated fitting covers common angles between 60° and 120°. For very acute angles (below 60°) or very obtuse angles (above 120°), contact WoodUp before ordering to validate compatibility with your exact configuration.

Do articulated rail fittings need to be ordered for all angles, even slight ones?

Yes, whenever the balustrade changes direction. Even for an angle of 170°, rigid aluminium rails cannot absorb the deviation without a fitting. The articulated fitting handles all non-zero angles. For a perfectly straight installation, use the straight Ø16mm Ellipsis rail connector instead.

Can this articulated rail fitting be used on a Quadrum balustrade?

No. This fitting is designed for Ø16mm round rails in the Ellipsis range. For 16x16mm square rails in the Quadrum range, use the specific Quadrum articulated fittings 16x16mm Quadrum articulated rail fitting. The two fittings have different internal dimensions and are not interchangeable.