Wood rail 91x21 mm fence gate

Name: Wood rail 91x21 mm fence gate
Brand: Levigne
SKU: SB1200D
Price: 12.6 EUR
Availability: InStock

Douglas fir or Fir wood rail, 91x21 mm section, 4 available lengths: 100, 150, 175 or 200 cm. Sold individually. Structural component for fences, gates and pedestrian gates. Untreated — outdoor protection (oil, stain) to be applied before outdoor installation. Compatible with Woodup fence and gate boards 91x21 mm section. Use stainless steel screws for fixing to avoid rust stains on the wood.

Wood species

Length (cm)

Reference SB1200D

€12.60 VAT included

In stock Dispatched within 10 days

Quantité

Paiement :

Paiement en 2x, 3x, 4x avec

Wood Rail 91×21 mm – Douglas Fir or Fir, 4 Lengths from 100 to 200 cm

This natural solid wood rail with a cross-section of 91×21 mm is available in Douglas fir or Fir, in four lengths: 100, 150, 175 or 200 cm. Sold individually, it forms the horizontal structural component of fences, gates and pedestrian gates. It is compatible with the fence and gate boards of 91×21 mm section from the Woodup range. Untreated, it must receive a water-repellent treatment before installation in exposed outdoor conditions.

Main specifications

Specification	Description
Species	Douglas fir or Fir
Section	91×21 mm
Available lengths	100, 150, 175 or 200 cm
Finish	Raw untreated
Sold	Individually
Compatibility	Woodup fence and gate boards 91×21 mm
Use	Outdoor – treatment required before prolonged installation

Key features

✓ 4 lengths: 100 to 200 cm for all opening widths
✓ Douglas fir or Fir: superior natural durability of Douglas fir outdoors
✓ 91×21 mm section: compatible with the entire Woodup fence and gate range
✓ Sold individually: precise calculation according to the number of rails required
✓ Cut to exact length: solid wood easily workable on site

Installation advice

For a standard fence, place one rail 10-15 cm from the bottom and one 10-15 cm from the top. For heights> 80 cm, add an intermediate rail. Fix the boards to the rails with stainless steel screws 4×40 mm with pre-drilling. Ensure the rails are level before fixing the boards. For gates, also fit a diagonal brace to prevent warping under the weight of the panel.

Care and protection

Treat the rail before installation with an exterior stain or oil. Renew every 2 to 3 years. Douglas fir weathers naturally and remains stable without treatment. Fir requires regular maintenance to avoid accelerated rotting in damp areas. Check annually the contact zones with posts or boards.

Frequently asked questions

How many rails are needed for a gate panel 120 cm in height?

Two rails minimum: one at the bottom at 10 cm and one at the top at 110 cm. For added rigidity, fit a third rail at mid-height (60 cm) and a diagonal brace.

Can the 200 cm rail be used for a gate 200 cm wide?

Yes, the 200 cm rail corresponds exactly to this width. For a gate, allow 3 rails per panel across the height to ensure the rigidity of the whole.

Can the rail be cut to an intermediate length?

Yes. Solid wood can easily be cut with a circular saw or mitre saw. Immediately treat the fresh cut with an end-grain sealant to protect the exposed section.

What is the difference in durability between Douglas fir and Fir for this rail?

Douglas fir has a natural durability class 3 outdoors without ground contact, allowing it to last several years without treatment. Fir (class 3-4) is more susceptible to fungi and requires regular treatment in damp conditions.